Examples of 'finderscope' in a sentence
Meaning of "finderscope"
Finderscope (noun) - A small auxiliary telescope attached to a larger astronomical telescope to help locate celestial objects before viewing them through the main instrument
Show more definitions
- A small telescope, or other sighting device, mounted on top of a main telescope to enable approximate directional positioning.
How to use "finderscope" in a sentence
Basic
Advanced
finderscope
Slide forward until the finderscope is seated securely.
Unscrew battery cover for the StarPointer finderscope.
Optical finderscope assembly and alignment.
Adjust screws to center object on the finderscope cross hairs.
Locate the finderscope optical assembly.
Align the object with the red dot of the finderscope and press ENTER.
Place the finderscope base above the holes on the tube.
Hold the white plate a few inches behind the finderscope eyepiece and move the telescope.
Lock the finderscope base into position by tightening the screws.
If it moved, realign it and adjust your finderscope.
Check the finderscope to see if the object is also centered on the crosshairs.
Also, the image in the finderscope will be inverted.
Once the finderscope is in place, retighten the thumbscrew to secure it.
Use three adjustment screws to center the finderscope crosshairs on the object . 6.
StarPointer finderscope to help with alignment and accurately locating objects.
See also
However, the illuminated mount and red dot finderscope must be turned off manually.
Now the Red Dot Finderscope is aligned and ready to point for the telescope.
Do not forget to switch off the Red Dot Finderscope after use!
Turn on the starpointer finderscope and look through it to find the red dot.
Finderscope Iron sight Reflector ( reflex ) sight Cheshire collimator, A simple tool to collimate a telescope.
Look through the StarPointer finderscope and pan the telescope until the object appears in the.
In the finderscope of a telescope, begin with Antares in the center and shift southwest.
StarPointer finderscope and bracket preassembled.
Insert the finderscope into the bracket, so that the rubber ring locks it in place.
Install the finderscope ( not available in the package ) onto the base.
Position the finderscope bracket on the telescope main body Fig . 6.
In the finderscope or binoculars, you will clearly see 24 UM to the southwest.
Center your finderscope at Eta and shift the view about 1.5 degrees northeast.
I swapped the finderscope with the one that was on the C8N (they are interchangeable).
Remove the finderscope with finderscope bracket ( H ) attached from the box.
Place the finderscope ( H ) in the finderscope bracket ( G ) and secure with three finderscope bracket set screws.
For 5x24 and 6x24 finderscopes, use three adjustment screws to center the finderscope crosshairs on the object.
