Examples of 'finish rolling' in a sentence
Meaning of "finish rolling"
finish rolling - complete the process of rolling something like a cigarette or pastry
How to use "finish rolling" in a sentence
Basic
Advanced
finish rolling
The finish rolling is included in the hot rolling.
The respective conditions for the finish rolling are as follows.
Finish rolling the sail in the area of the sprogs.
This makes high precision finish rolling of steel products viable.
Finish rolling is performed after completion of the rough rolling.
It is preferable that the austenite grain size before finish rolling is smaller.
So finish rolling.
The surfaces of the steel sheets after the finish rolling were observed.
The conditions of the finish rolling were the same as those described above.
The austenite grain diameter is then further refined by carrying out finish rolling.
The finish rolling step is commenced after completion of the rough rolling step.
After the final annealing, finish rolling is carried out.
The finish rolling is included in the hot-rolling.
To that end, it is necessary that recrystallization of austenite after finish rolling is promoted.
The upper limit of the finish rolling start temperature is not particularly limited.
See also
Accordingly, it is desirable to start cooling within 5 seconds after completion of finish rolling.
These examinations revealed optimum finish rolling conditions for the ingredient range according to the invention.
Finish rolling that spliff and get me out of here, you dope fiend.
In a hot rolling process, a slab undergoes finish rolling after completing rough rolling.
In addition, the hardenability excessively increases, and bainite is generated after finish rolling.
Then, the rough rolled bar is subjected to finish rolling to make a rolled steel.
The finish rolling temperature is controlled to Ar3 transformation point or greater.
That is, it is preferable that the austenite grain size before finish rolling is small.
Incidentally, the upper limit of the finish rolling start temperature is not limited in particular.
And a joint will keep it rolling . So finish rolling.
After the rough rolling, finish rolling may be continuously performed after jointing a sheet bar.
All right, let us go somewhere so I can finish rolling this joint.
The finish rolling temperature is therefore preferably the Ar3 transformation temperature or greater.
Therefore, it is important that rolls for finish rolling have a smooth roll surface.
Finish rolling 13 of the steel ingot or slab is performed.
Hey, when are you gonna finish rolling that?
Finish rolling 13 of the steel ingot or slab is carried out.
Some technologies employ 3-roll mills for finish rolling of structural steels.
A method of finish rolling long products such as bars, rods and the like, comprising,.
Accordingly, the rolling termination temperature of the finish rolling may be T1°C or higher.
Are you gonna finish rolling that joint or should I?
As described later, a rolling starting temperature for the finish rolling is less than 1080°C.
Are you gonna finish rolling that joint or should I? It's beautiful.
R2 identifies the position of the reels R when they finish rolling over the ejection apron 15.
Tf is the finish rolling ending temperature except for the case where P1 was " - ".
Note that a sheet thickness after the finish rolling is, for example, 2 mm to 10 mm.
Subsequently, finish rolling was performed under a condition where a finish temperature was set to 860°C.
Further, " FT " represents the finish rolling temperature ( or finishing temperature ).
Hence, the finish rolling temperature is preferably the Ar3 point or higher and higher than 820°C.
Note that an upper limit of the finish rolling temperature is desirably 1040°C.
The finish rolling is completed at the temperature range of T1 - 40°C or more.
It is necessary to set the finish rolling temperature at 900°C or more.
The lower limit of the finish rolling temperature is preferably 700°C.
You'll also be interested in:
Examples of using Finish
Show more
We have to finish cordoning off the area
Round classic style with chrome finish
Should be able to finish the stairs today
Examples of using Rolling
Show more
Use caution when rolling on carpeted surfaces
Rolling on the floor laughing my ass off
We have a stretcher rolling out of the ambulance
