Examples of 'finished surface' in a sentence
Meaning of "finished surface"
finished surface: This typically refers to a smooth and completed surface, often seen in construction or manufacturing contexts
How to use "finished surface" in a sentence
Basic
Advanced
finished surface
This can cause an uneven finished surface.
A perfectly finished surface is thereby obtained before ozonation.
Mount wall can flush with finished surface.
True to its name the finished surface looks like that of an orange.
Additionally you will have a better finished surface.
We can process vary finished surface and size customized.
Side cleats may be visible and should be a finished surface.
The dark oil finished surface is also easy to clean with a damp cloth.
Occasionally you may find damage to the finished surface.
Allow for the thickness of the finished surface when installing the back box.
The resulting piece may then be polished to a finished surface.
The finished surface below the fascia and rafters is called the soffit or eave.
The shoulder must rest on the finished surface of the floor.
When the finished surface roughness is decreased higher fatigue fracture strength can be obtained.
There were no unsightly wrinkles on the finished surface of the packaged product.
See also
This lets one optimize the quantity of filler then used to obtain a finished surface.
Finish Texture of the finished surface of the.
Method for steam pressing composite board having at least one finished surface.
As a result, the finished surface quality is enhanced and consistent.
The choice of grade is determined by the use for the finished surface.
Some pictures of vary finished surface as below for your reference,.
I also put peel ply over the BIDs for a nicer finished surface.
Finally, a finished surface was often provided using grinding stones and sand.
Both effects may result in a loss of quality of the finished surface of the metal.
FIG . 20 shows a finished surface obtained in Comparative Example 1 that is dull due to scuffing.
The edge of the back box must be installed flush with the finished surface.
As a result, a transparent bevel finished surface that does not remain white is obtained.
Back box must be installed with front edge flush with the finished surface.
As a result, the foundation fabric of a finished surface fastener is tensed strongly lacking flexibility.
These can include materials which affect the physical properties of the finished surface composition.
Allow for the thickness of the finished surface when installing the back-box.
The back box must be installed with the front edge flush with the finished surface.
Robust surface, easy to clean, the finished surface is extremely robust and easy to maintain.
This produces the appropriate chemical reaction that provides the metal substrate with its finished surface.
Organic coated flat products already have their finished surface in the delivered condition.
Rather, fiberboards generally must be painted or otherwise covered to produce a finished surface.
Also, this decreases the roughness of the finished surface and increases the dimensional accuracy.
Once prepared, it was applied by pressing a sandcovered trowel into the finished surface.
In Figure 5 the finished surface decoration 10 is shown placed on a floor 9.
Once epoxy cures, it becomes a hard finished surface.
FIG . 19 shows a good finished surface having luster obtained in Example 1.
When recessed, the shoulder must rest on the finished surface of the wall.
If there are nails, either remove them or set them well below intended finished surface.
The rotor is driven by a motor to provide a smooth, finished surface on the poured concrete.
The edge of the back-box must be installed flush with the finished surface.
SoundLoc 2.0 should be laid out perpendicular to the finished surface flooring to reduce seams.
When not properly controlled, the grinding operation can create micro-crack networks on the finished surface.
The form 20 is configured to provide a suitably stable and finished surface for ply placement.
Discussion, All interior and exterior walls have slight variances in their finished surface.
The method according to Claim 5, wherein said finished surface contour is flat.
You'll also be interested in:
Examples of using Finished
Show more
We have not finished the dress yet
I finished exactly half in the allowed time
But we have not finished the puzzle
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
