Examples of 'fire damper' in a sentence
Meaning of "fire damper"
A fire damper is a device installed in heating, ventilation, and air conditioning (HVAC) systems or ductwork to prevent the spread of fire and smoke within a building. It is designed to close automatically in case of fire, blocking the passage of flames and reducing the risk of fire spreading through the ventilation system
Show more definitions
- A passive fire protection product used in heating, ventilation, and air conditioning ducts.
- A damper which closes off an air duct automatically in the event of fire so as to restrict the passage of fire and smoke.
- A mine worker who detects and clears a mineshaft of firedamp by intentionally burning or blowing it up.
How to use "fire damper" in a sentence
Basic
Advanced
fire damper
Circular fire damper for large diameters.
Activation of hand valve on the fire damper.
Fire damper with operating point data.
Fold the positioning plate perpendiculary to the fire damper.
Fire dampers and fire damper cartridges with.
The ventilation system is working and the fire damper is open.
German fire damper in underground parking of a commercial building.
That can be installed at a minimal distance from another fire damper.
Fire damper management system.
Place the lower collar on the fire damper and over the upper collar.
The fire damper identification number shall also be placed on any remote controls required.
Mount the cable onto the frame of the fire damper with the thread cutting screws.
Fire damper test standard Fire damper product standard.
Chances are you've never heard of a fire damper.
Fire damper open Fire damper closed.
See also
Available motor-driven fire damper and smoke exhaust monitoring systems.
This significantly reduces the fire-resistant properties of such a fire damper.
PRINCIPLE OF OPERATION The fire damper blade is open when the ventilation system is working.
For the first time, our system will be open to ALL Fire Damper vendors.
A fire damper located in the lower end of the duct ;.
Surface mounted circular fire damper with a fire resistance of 60 minutes.
FIRE DAMPER CARTRIDGE Fire damper cartridges constitute a compact solution for small-diameter circular ducts.
Enables time-controlled, external or manual testing of fire damper operation.
In this situation, only a fire damper would respond to requirements such as environmental pressure.
The kit for surface-mount makes it easier to install the fire damper CR60 in a wall / floor.
Set the fire damper by turning the shut-off blade to the open position.
Product presentation CR60 Optimised circular fire damper with a minimum fire resistance of 60 minutes.
Fire damper in oversized hole in a 2-hour rated concrete slab.
Flue chimney in stainless steel, circular fire damper CR60 RFT.
The circular fire damper cartridge SC ( + ) is held in open position by the fusible link.
Product presentation CR120 Optimised circular fire damper with a fire resistance up to 120 minutes.
During installation, the fire damper and actuator must be protected with, e.g., a plastic cover.
You'll also be interested in:
Examples of using Damper
Show more
Close fireplace damper when not in use
Damper assembly for wall or roof venting
Check that the damper opens freely
Examples of using Fire
Show more
I can not fire any of these people
I wish that we could build a bigger fire
Fire was returned and three men were injured
