Examples of 'firing temperature' in a sentence
Meaning of "firing temperature"
firing temperature: Refers to the specific temperature required for firing ceramics or other materials in a kiln or furnace to achieve the desired physical and chemical properties
How to use "firing temperature" in a sentence
Basic
Advanced
firing temperature
The original firing temperature can be determined.
This design parameter is important since the efficiency of a GT increases with its firing temperature.
The firing temperature of a kiln will too.
To obtain low porosity high firing temperature of products is required.
The firing temperature will be determined by the frit maturing temperature.
Depending on the substrate, the firing temperature may vary.
An increasing firing temperature is accompanied by an increase in strength.
Note that, the degree of coalescence increases as the firing temperature increases.
Optimum firing temperature and properties at this temperature.
Effectively, less fuel is then needed to reach a necessary firing temperature of the gas turbine.
Effect of the firing temperature on the final clinker.
Other material and / or processing parameters may also affect the selected firing temperature.
Relationship between firing temperature and decomposition of fluorine compounds.
Hence, the shrinkage undergone by a body during sintering is a function of the firing temperature employed.
At higher firing temperature c.
See also
The first formulated composition ( PU-1 ) displayed a high tendency to bloat at temperatures near firing temperature.
With the increase of firing temperature follows an increase of NOx formation.
The use of 10 % glaze sludge in the composition lowered the firing temperature by 20 C.
Low firing temperature which results in a porous and less dense material.
Preferably, the time at the maximum firing temperature is comprised between 7 and 25 min.
The firing temperature should be sufficiently high to densify the erosion-resistant refractory.
With respect to the enamel frit a firing temperature of up to 600 °C is disclosed.
Also, the firing temperature may require adjustments in the formulation of the initial composition.
FIG . 13 is a graph showing Qu relative to firing temperature.
To increase the firing temperature of the layers as much as possible ;.
FIG . 13 shows the Q value ( Qu ) of the thus fabricated resonator relative to the firing temperature.
The higher the firing temperature is, the higher the degree of coalescence is.
For red earthenware, the firing temperature affects the color of the clay body.
The firing temperature of the paste is preferably lower than that of step 207.
Fig 19 shows the effect of firing temperature on the production of O ' - SiAlON from Example 17.
A high firing temperature thereby being able to withstand the refiring of the envisaged conductive layer ( s ) ;.
It has a lower firing temperature than Portland cement, and is thus less polluting.
The firing temperature is app roximately 1300°C . The fuel used has hitherto been natural gas.
A boron frit having a firing temperature of approximately 1085°C is particularly preferred.
When the firing temperature is lower than 400°C, no sufficient catalyst activity is obtained.
When the firing temperature is lower than 100°C, adhesion to the support deteriorates.
You'll also be interested in:
Examples of using Firing
Show more
You delayed firing for two seconds
Firing the weapon will be your responsibility
Reports artillery firing in the region of balal
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
