Examples of 'fitting can' in a sentence
Meaning of "fitting can"
fitting can: This phrase could refer to a container or receptacle suitable for accommodating items or objects. It may imply the capacity to hold, store, or contain something in a convenient or appropriate manner.
How to use "fitting can" in a sentence
Basic
Advanced
fitting can
A bayonet type fitting can also be provided.
Fitting can be recycled at the end of life.
A high pressure fitting can damage solar panels.
Fitting can be adjusted.
Appliances used for fitting can be sterilized in an autoclave.
Also a combination of numeric integration and curve fitting can be used.
The light fitting can be done in post production.
Massage can help relax the surrounding muscles so that a correct fitting can be made.
Interference fitting can be preferred as it is the quickest.
If a ring gauge is not available, a fitting can be used.
The fitting can take several forms.
Deformations caused by incorrect fitting can alter the specifications.
The fitting can be performed automatically by a processor.
According to one embodiment said form fitting can be assisted with adhesive.
Incorrect fitting can result in incorrect measuring results.
See also
Dies changed in axis position, special hose fitting can be fitted.
Curve fitting can be used in two distinct ways.
However, if reliable historical data are available, distributional fitting can be accomplished.
The fitting can be held by means of a tightening band.
Choosing to set up an extra light fitting can add extra illumination to a given space.
The fitting can in particular be a cable joint or termination.
If necessary, surface of hose fitting can be cleaned with a brass wire brush.
The fitting can be built with or without restraint.
Further modifications of the parameters of the inlet fitting can provide for the desired K-Factor.
Main fitting can only pivot in one direction.
A catheter or intravenous ( IV ) luer fitting can be attached to the attachment end.
The fitting can be connected to a frame.
Accordingly, the short-circuiting terminal fitting can be easily inserted.
This fitting can be manufactured directly by moulding of thermoset.
Unlike low-pressure fittings, a high-pressure fitting can only be used once.
This fitting can also be a corner fitting moulded of thermoset.
Note, Special dimension and other standard fitting can be customized, OEM / ODM is welcomed.
The end fitting can break easily under a side load.
This means that each fitting can be independently controlled.
The fitting can be dismantled and assembled multiple times without deterioration of the unit.
At this point the connector fitting can be used at the maximum operating pressure.
The fitting can be switched back and forth between activated and deactivated with any card.
For example, said fitting can be a screwed fitting.
Fitting can also be done for one size smaller . For bigger size please write us.
In a further alternative method, the fitting can be produced using the so-called " ploughing-in " technique.
The fitting can also be made from other plastics and stainless steel when required.
The diameter D of the pipe fitting can vary between 10 and 30 mm, for example.
Bad fitting can interfere with the sounds you hear and create more feedback.
The handlebar and stem fitting can have a small play due to the stem holding system.
The fitting can also be tightly connected to the well frame.
A manual for fitting can be found under Support.
The fitting can be used for low pressure weapons and aircraft.
The quick disconnect fitting can be installed horizontally, or pointing downward.
The fitting can be brazed to the exchanger core at the same time.
In some cases, the fitting can be removably secured to the cassette.
