Examples of 'fitting must' in a sentence
Meaning of "fitting must"
fitting must: Used in the context of something that needs to be tailored or adjusted to suit a particular purpose or situation. For example, 'The dress fitting must be done before the wedding.'
How to use "fitting must" in a sentence
Basic
Advanced
fitting must
The fitting must be installed without any tension.
The discharge from the fitting must always be free.
The fitting must not be coated with thermal insulation.
If the cable is damaged the entire fitting must be discarded.
The fitting must always be secured in every type of connection.
When first filled the outlet valve on the fitting must be opened.
The fitting must always be secured in all types of connections.
The corrosion protection for the fitting must be adapted to the local conditions.
The fitting must be properly installed in the correct mounting position.
The two small openings on the tank fitting must be facing up when fully tightened.
The gate fitting must be installed so that it is horizontal relative to the.
The cold water pipe and MAW wall fitting must be safely secured.
The fitting must be transported and stored in its protective packaging until it is installed.
The cable to the light fitting must be connected to terminals B.
This fitting must be connected to the blue water hose leaving the welding torch.
See also
If an overpressure limitation is necessary, a suitable fitting must be present.
The pol fitting must be protected when disconnected from the propane tank.
In the case of wooden gates, the gate fitting must be through bolted.
Electric fitting must be safe and ensure proper safety to the occupants of the house.
Responsibility Resources - Materials are cut to patterns, and fitting must meet instructions.
Rather, the fitting must be done in a fitting frame.
The cold water pipe and AHo 40 MTH wall fitting must be safely secured.
The tank fitting must be made from metal!
The fitting must be short, straight, horizontal and positioned slightly in ascent.
If a bypass is required, a second fitting must be installed upstream of the plugging seal.
Note, The hose fitting must be securely hand tightened to prevent gas leakage Figure 12.
For steel gates, the gate fitting must be attached to the main frame.
The trap fitting must be connected to a Ø 32 mm PVC outlet pipe.
Transport and storage A fitting must be handled, transported and stored with care.
Also, a proper fitting must exist to allow the desired extension.
CONFIGURATION, The smoke fitting must be configured as vertical as possible with a maximum 45 ° slope.
