Examples of 'fittings must' in a sentence
Meaning of "fittings must"
fittings must - This phrase suggests that fittings, which are the act of trying on and adjusting clothes or other items to ensure proper fit, are necessary or required. It implies that there is a need to ensure that the clothing or item fits correctly, possibly for reasons of comfort, appearance, or functionality
How to use "fittings must" in a sentence
Basic
Advanced
fittings must
All fittings must be tested on seal tightness.
The combustion air supply fittings must never be altered.
The fittings must be sharpened like a screwdriver.
The installation instructions supplied with the fittings must be observed.
Appropriate fittings must be selected based on the.
Joints should be kept to a minimum and compression fittings must not be used.
Damaged fittings must not be installed.
The materials used for the cab and its fittings must be fire-resistant.
All fittings must be installed on new equipment only.
Furthermore, both of the mating flat surfaces of flare face fittings must be precisely machined.
These fittings must be checked before burner is lighted.
When installing this appliance, all pipe and fittings must be free from loose dirt.
Pressure fittings must rotate slightly in both directions.
IMPORTANT, the flat areas of the fittings must lie in the same plane.
Galvanized fittings must be used for installation on galvanized pipe.
See also
Period without a filter cartridge screwed on . f The torque of the fittings must not exceed 15 Nm!
Internal fittings must be ordered separately.
To achieve the maximum IK10 rating, fittings must withstand an impact of 20 joules.
Light fittings must be screened to prevent glare and positioned to avoid annoying reflections.
Electrical equipment and fittings must comply with local regulations.
All fittings must be protected when disconnected from the LP cylinder.
A combination of pipe fittings must be used to connect the grill.
The tap fittings must be permitted for operation with enclosed ( pressurised ) instantaneous water heaters.
The tap and outlet fittings must be appro ed for operation.
End fittings must have a mating thread, typically female, of the same size.
The tap and outlet fittings must be approved for operation.
The tap fittings must be permitted for operation with enclosed (pressurized) continuous-flow heaters.
All electrical fittings must be properly connected and grounded.
The seal of the fittings must be checked by pouring liquid soap on them.
A combination of pipe fittings must be used to connect dryer to existing gas line.
Unused cable conduit fittings must be locked with a closing element or plug.
A combination of pipe fittings must be used to connect the dryer to the gas line.
All male duct pipe fittings must be installed downstream with the flow of air.
Emergency light fittings must be regularly tested to confirm that they will operate when needed.
Any special decoration or fittings must be submitted to the Organiser for prior authorisation.
Jaws and fittings must be used in an APPROVED COMBINATION.
One-hand mixer and thermostatic fittings must be suitable for hydraulically controlled instantaneous water heaters.
You'll also be interested in:
Examples of using Fittings
Show more
Make sure hose and fittings are tightened
Check fittings with soapy water solution
Barracks furniture and fittings and miscellaneous
Examples of using Must
Show more
They must have changed their view
Someone you know must have died
He must have loved you very much
