Examples of 'fixing bolts' in a sentence
Meaning of "fixing bolts"
Fixing bolts - Refers to the act of repairing or securing bolts in place to fasten objects together
How to use "fixing bolts" in a sentence
Basic
Advanced
fixing bolts
Check the tightness of the fixing bolts.
Open the fixing bolts of the cast cover.
Timing system side support fixing bolts.
Tightening the fixing bolts of compressor.
Supercharger side support fixing bolts.
Fixing bolts that are too long will not clamp adequately.
The latter is suspended in fixing bolts in the lid.
Fixing bolts of metal.
Missing or fractured fixing bolts.
The fixing bolts and the fixing holes can be threaded.
The base portion had apertures for passage of fixing bolts.
Remove the fixing bolts and remove the worn or damaged flap.
It is better if the drilled holes are somewhat larger than the fixing bolts used.
The length of the fixing bolts will depend on the thickness of the workbench.
Thus the two edges of the recess are released simultaneously by the fixing bolts.
See also
Fixing bolts of the surface installation must be chosen according to the fl oor material.
Mount the binding unit at your desired position and tighten the fixing bolts.
Ensure that suitable fixing bolts are used considering the ceiling or wall construction material.
This solution absorbs the violent shear forces to which the fixing bolts are subjected.
The big amount of fixing bolts is a result of relatively weak and flexible attaching elements.
The molding device includes a safety device that locks the fixing bolts in their active position.
Regularly examine all fixing bolts and nuts, particularly those of the cutter bar, for tightness.
Details of materials used in structural parts including attaching brackets and fixing bolts see Annex V.
Be sure to replace cutter guide fixing bolts when they are loosened, worn or damaged.
Preferably, the side flanks are fixed to the upper flank by fixing bolts.
For wall mounting, two fixing bolts must be used to carry the system.
Next, secure the damper in its position with the damper fixing bolts.
Unscrew the two fixing bolts using a 5mm Allen key.
Tighten the bearing box 's fixing bolts M.
Insert four fixing bolts and screw them tight to the Motor casing 8.
The corners are drilled with holes 54 to receive fixing bolts.
The fixing bolts 58 are then in their active position.
To finish, check that the fixing bolts are sitting correctly 6.
The fixing bolts 58 are therefore in their retracted position.
The motor is fixed in place by the stator by means of fixing bolts 10.
Undo nuts and remove fixing bolts ( 3 ) on both sides of the tracking shaft.
Loosen the right hand bearing box's fixing bolts M fig 9.
All the fixing bolts 58 look identical in the embodiment shown in the figures.
Millimetric adjustment of the height . The fixing bolts lead to a vertical adjustment of about 15 mm.
The engine fixing bolts 6 are provided so as to penetrate through the lower joint portion 41A.
The supporting console 21 is loosely connected to the supporting bracket 27 by the fixing bolts 36.
Prior to assembly the fixing bolts ( 11 ) are to be wet with anti-locking compound.
The floor joists are fixed to the foundations 42, for example using fixing bolts ( not shown ).
The assembly is then held by the fixing bolts 20 a on which the nuts 20 b are tightened.
To that end, the fixing bolts 36 extend through ample bores 40 into the pole pieces.
FIG . 8 shows the bracket 31 and its fixing bolts in more detail.
Fasten the two fixing bolts with 12Nm using a 5mm Allen key.
Fully tighten the cutter fixing bolts and then loosen them approx . 1/2 turn.
You'll also be interested in:
Examples of using Bolts
Show more
Heads of bolts go on the inside of the cart
Fasten with the previously removed bolts
Push bolts into holes on back of handle
Examples of using Fixing
Show more
I was fixing the roof and got hurt
There is no one better at fixing relationships than me
Fixing the air for your mom
