Examples of 'flame size' in a sentence
Meaning of "flame size"
flame size - refers to the physical dimensions of a flame, typically in the context of a fire or combustion. It can describe how large or small a flame appears.
How to use "flame size" in a sentence
Basic
Advanced
flame size
An intermediate flame size is used to continue cooking.
Turn counterclockwise the screw to increase flame size.
Adjust surface burner flame size so it does not.
Flame size should be adjusted so it does not.
Turn counterclockwise to increase flame size.
Flame size should match the size of the pan.
Turn clockwise to decrease flame size.
Select a burner and flame size appropriate to the pan.
Turn clockwise the screw to decrease flame size.
The flame size on the rear portion of the bridge.
Turn the knob to adjust the flame size.
Adjust flame size so it does not extend beyond the edge of the.
Turn the control knob to control the flame size.
Select a burner and flame size appropriate for the cookware size.
The inner portion of the dual burner flame size.
See also
Flame size can be increased or decreased with the turn of the screw.
Using the gas surface burners how to select flame size.
The flame size can be set continuously between high and low.
The rear or outer portion of the burner flame size can.
Control the heat and flame size with just a touch of a button.
The rear portion of the bridge burner flame size can.
The flame size on a gas burner should match the cookware you are using.
The inner portion of the dual burner flame size can be.
The flame size must be adjusted with the gauge provided prior to testing.
Many also give you control over flame size as well.
Match the flame size on a gas burner to the cookware being used for fastest heating.
Check the pilot system for proper flame size and operation.
Figure 3B is a graph showing relationship between incineration temperature and flame size.
Turn center stem adjusting screw to set flame size clockwise to reduce counterclockwise to increase.
Gently tighten the adjusting screw and check the flame size.
This system ensures the flame size will only change by way of the user.
This operation will automatically provide the proper flame size at medium setting.
Use screw B to adjust the flame size of the outer portion of the dual burner.
After the burner lights, turn knob to desired flame size.
Use screw B to adjust the flame size of the center portion of the bridge burner.
Once gas is ignited, turn the knob to adjust the flame size.
Depending on requirements, flame size can be set in a continuous manner.
After the burner ignites, turn the knob to adjust the flame size.
Match Pan Diameter to Flame Size - The flame should be the same size the.
After the flame lights, turn the knob to adjust the flame size.
Use a chart below as a guide for determining proper flame size for various types of cooking.
After the burner ignites, turn the knob in either direction to adjust the flame size.
Turn clockwise to decrease flame size Figure 16.
After the burner lights, turn the knob to the desired flame size.
If the flame goes out, increase the flame size and test again.
After the burner ignites, turn the control knob to the desired flame size.
Once lit, release the button and regulate the flame size turning the knob.
Use medium-weight, flat bottomed pans that match the flame size.
The chips were lighted by a burner with flame size 25 mm long.
You'll also be interested in:
Examples of using Size
Show more
Change duct size gradually to minimize turbulence
I do not want a comedian knowing my dress size
Size expressed as minimum and maximum weight
Examples of using Flame
Show more
Flame retardant materials bear the mark
Envision the flame burning within you
Flame disk or combustion heads dirty or worn
