Examples of 'flash output' in a sentence
Meaning of "flash output"
Flash output typically refers to visual or audio content generated by Adobe Flash, a multimedia software platform widely used for creating and delivering interactive content such as animations, games, videos, and more across various devices and web browsers
How to use "flash output" in a sentence
Basic
Advanced
flash output
Flash output is controlled by your camera.
Adjusts the intensity of flash output.
Flash output drops slightly when the wide panel is used.
Press the or button to set the flash output.
Determine the flash output from the exposure and test pictures.
Sets the method for determining the intensity of flash output.
Effective when you want a specific flash output regardless of the subject conditions.
A short beep can be heard when reaching the adjusted flash output.
Continuous increasing and decreasing of the flash output can heat up the device additionally.
The flash output is then controlled instantly so that the proper flash exposure is obtained.
A function for adjusting ambient exposure through aperture and shutter speed and without adjusting flash output.
Press the SEL button to make the flash output amount display.
AUTO Flash output is automatically adjusted.
Press the SEL button several times to make the flash output amount.
FULL Full flash output Manual flash mode The camera must be set to manual mode.
See also
Group C is independent with its flash output level assigned by the camera.
Flash output can be adjusted using the fl ash-level dial.
Multiple pre-flashes can be used to improve the flash output.
Re-adjust the flash output on the desired value.
It will also adjust the brightness when combined with the flash output controller 4.
Signal blinking - flash output was sufficient for exposure.
Brightness of the lamp can be adjusted by Flash Output Controller 4.
With cameras that have the flash output level compensation function, the.
The ARD ( anti-reflective device ) shield can be removed to maximize flash output.
By turning the control switch, the flash output can be adjusted independently from each channel.
Press the + button or - button to set the flash output amount.
In manual flash mode M, full flash output is deployed if no partial lighting is set.
O Don t trigger a flash during the 15 minutes cooling time, neither with reduced flash output.
Output Negative Push-Pull Flash output external illumination.
It will take 1-2 seconds until the flash output is reached.
The flash tube / head whose flash output has been set to “ -- ” will not fire.
Set the Master flash to manual mode and set the flash output to approximately 1/16.
Each time you press the button, the flash output will increase / decrease by 1 stop.
Connect the warning light to flash output terminals 4 and 5.
You'll also be interested in:
Examples of using Flash
Show more
The name will flash on the screen
Flash has found one of my party favors
You will just flash the mirror
Examples of using Output
Show more
One output will contribute to this outcome
Illuminates when output is sent to the tray
Output signals common to measuring technology are available
