Examples of 'flash power' in a sentence
Meaning of "flash power"
The term 'flash power' can have multiple interpretations depending on the context. It could refer to the ability of a camera flash to emit a strong burst of light, or it could represent the speed and efficiency of an electronic storage device, such as a flash drive or solid-state drive. Without further context, it is necessary to determine the intended meaning
How to use "flash power" in a sentence
Basic
Advanced
flash power
Switch for reducing the flash power.
Flash power up and down buttons.
Shows the currently adjusted flash power.
The displayed flash power setting will not change.
Press the or buttons to adjust the flash power.
Adjust the flash power so that the exposure is right.
Adjust the modelling light depending on flash power.
I just adjust the flash power depending on the distance.
Open up the aperture or increase the flash power.
Flash power activating.
We could adjust the flash power.
Flash power up to half.
Adjusting the modelling light independently of the flash power.
Flash power packs must only be connected to main outlets with ground connection.
Outdoor portraits rarely require a large amount of external flash power.
See also
This is an external flash power supply for exclusive use with OLYMPUS digital cameras.
The device does not flash after the flash power has been changed.
The selected LED flash power is shown in the third line of the LCD display.
To achieve a correct exposure we will manually set flash power output later.
Then, you reduce the flash power with the flash compensation as I mentioned above.
Do not use this product for any purpose other than as a flash power supply.
Set the electronic flash power switch to ON.
In manual and shutter priority modes, there is no difference in flash power.
The flash power is displayed on LED Display 5.
In Manual mode you can also choose from three flash power levels.
Distribution of flash power is achieved asymmetrically over the 2 channels A and B.
ControlTL Channels work with TTL or remote flash power control.
Power distribution Distribution of flash power is achieved symmetrically or asymmetrically over the 2 channels A and B.
Set modeling lamp depending on the flash power 1.
A further stepwise flash power reduction by 2 f-stops is done by using dial 8.
Regardless of the remaining capacity of the battery, the flash power is the same.
Press the flash power up-down buttons together to enter into the “ Advanced Feature Setup ”.
Wait for 3 seconds and the display changes to the flash power setting.
Flash power control, 4 continuously adjustable f-stops.
In Properties, you may see the choice Copy this community profile to a USB flash power.
In this situation, shutter, aperture, and flash power all affect the brightness of the subject.
Press + or - button to set the desired flash power output.
Set your flash power to about 1/8th of its max power.
