Examples of 'flash tube' in a sentence
Meaning of "flash tube"
flash tube: A device used in photography to produce a flash of artificial light for illuminating a scene
How to use "flash tube" in a sentence
Basic
Advanced
flash tube
It is therefore impossible to insert a flash tube backwards.
Hold the flash tube at the right and left.
Posterior danger of bursting of flash tube.
Don t touch the flash tube with bare hands.
Flash tube already installed.
Light source xenon flash tube xenon flash tube.
Discharge the device before changing the flash tube.
This rod is surrounded by a flash tube containing xenon or krypton.
Tighten the iron wire to fix the flash tube.
Carefully pull the flash tube from the flash unit.
The flash tube does not touch the hair or the skin.
Posterior danger of bursting of flash tube through skin oil.
The present invention relates to a supply device for a flash tube.
Xenon flash tube.
Do not apply any fluids to the modelling lamp or the flash tube.
See also
Avoid touching the flash tube accidentally when mounting or changing accessories.
Don t clean the modeling bulb and flash tube with water.
To ensure that the flash tube and model lamp are well inserted.
Process for the photochemical treatment of a material using a flash tube light source.
Make sure not to touch the flash tube with bare hands accidentally.
The charge in the flash unit must me discharged before removing the flash tube.
Agitate the flash tube carefully and pull it out from the socket.
This will enable integration of the toroidal flash tube into the device.
Allow the flash tube and modelling lamp to cool for several minutes.
Please handle the modeling lamp and flash tube with care to avoid bursting.
The blender is not stopped and the mixture is shunted into a flash tube dryer.
Locate the two flash tube pin sockets above the modelling lamp socket.
Turn down the power before replacing the flash tube and wear insulated gloves.
Hold the flash tube only at the two insulated sockets and pull it out gently.
Danger of cutting and splitting through breaking modeling lamp and breaking or bursting flash tube.
Always use extreme caution when handling an exposed flash tube due to the existing overpressure.
Insert the new flash tube in the same way and fasten the retaining spring again.
The blender may be kept running and the mixture shunted into a flash tube dryer.
The technical specifications for the flash tube refer to tests with the original flash tube.
Danger of cutting and splitting through breaking LED and breaking or bursting flash tube.
The flash tube is to be changed by qualified personnel only!
Remove a center half-size briquette tray without flash tube.
Further, the flash tube assembly should be simple and inexpensive to manufacture.
An integrated soft-start prevents the flash tube from damage.
The flash tube is very delicate, avoid unnecessary handling of the flash tube.
Next, the laser technicians put a flash tube next to the crystal.
The flash tube has been arranged for generating light within the UV-spectrum.
Avoid sudden impacts as this can damage the flash tube and / or modeling lamp.
The flash tube and modeling lamp must not be touched during this procedure danger!
Multi-unit flash synchronisation for daisychained installations and solid-state xenon flash tube.
Solid-state Xenon flash tube with integrated DMX control for generating illumination arrangements and light shows.
With needle, nose pliers, hook the retention spring over the hook above the flash tube.
Press the flash tube with even, slight.
Hands should be dry with insulated gloves when load / unload the flash tube and modeling lamp.
Xenon flash tube with 5 joules.
