Examples of 'flasher unit' in a sentence
Meaning of "flasher unit"
A flasher unit, also known as a flasher relay or a turn signal relay, is an electrical component used in automotive vehicles to control the timing and operation of turn signals, hazard lights, and sometimes other flashing lights. It regulates the blinking frequency and duration of the lights, ensuring they function correctly and in sync with the driver's commands
How to use "flasher unit" in a sentence
Basic
Advanced
flasher unit
Flashing through the flasher unit.
The flasher unit is attached to the upper cover portion.
Motorcycle with a flasher unit.
The flasher unit is attached to an upper cover section of a front cover.
These sets work with any stock or stock style flasher unit.
The flasher unit checks for a defined energy consumption at a defined point in time.
Simulation device for the check control YesA flasher unit failure is displayed.
The flasher unit includes a pair of right and left flashers and a coupling member.
The structure makes it possible to reduce the number of components of the flasher unit.
For vehicles without flasher unit that carry out curent measurement for the failure check.
This is largely influenced by the reduced space positioned rearward of the flasher unit.
YesStart YesAny failure of the flasher unit is displayed.
Central Flasher Unit and Dimmer for halogen lights or LEDs.
These solutions simulate the CO partial pressure in the flasher unit.
Accordingly, a rear side of the conventional flasher unit rearwardly protrudes in a convex shape.
See also
Failure check and electrical connection LED flasher unit.
Figure 7 is a front view of the flasher unit 8 from which the lens plane is removed.
Figure 5 is a front view of the flasher unit.
Figure 13 is a front view of a flasher unit according to another embodiment.
Figure 6 is a top view of the flasher unit.
Figure 15 is a top view of a flasher unit according to another embodiment.
Figure 4 is a perspective view of a flasher unit.
However, the shape of the flasher unit 8 is not limited to this.
Figure 7 is a front view of a housing of the flasher unit.
The front cover 21 and the flasher unit 8 will be hereinafter explained in detail.
Installation may require the separate purchase of an electronic flasher unit or a Load Equalizer.
To gain access to flasher unit B remove the saddle as described on page 41.
Additionally, the headlamp is separately provided from the flasher unit.
The flasher unit 8 is attached to the opening 63.
With the structure, it is possible to protect the lens plane of the flasher unit 8.
There is no flasher unit on a 97.
There is only one test resistor for the entire flasher system in a single-circuit flasher unit.
You'll also be interested in:
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
Examples of using Flasher
Show more
I saw his flasher from the road
You do not know what it takes to be a flasher
No flasher dresses like you these days
