Examples of 'flat screwdriver' in a sentence
Meaning of "flat screwdriver"
flat screwdriver: a type of screwdriver that has a flat, narrow blade at its tip, used for turning screws with a straight slot in their heads
How to use "flat screwdriver" in a sentence
Basic
Advanced
flat screwdriver
Insert a flat screwdriver next to the hooks.
Select a suitable tool such as a small flat screwdriver.
Use a flat screwdriver to unscrew the fuse holder.
Wrap the end of a small flat screwdriver with tape.
Use a flat screwdriver to unscrew the conduit plug.
Disassembly of the clip can be aided by using a flat screwdriver.
Using a flat screwdriver unhook the up.
The speed control screw is adjustable with a flat screwdriver.
Take a flat screwdriver and share the contour.
Wedge the kerf open with a flat screwdriver or wooden.
Using a flat screwdriver loosen the hose clamp where.
Remove the next cover with help of a flat screwdriver.
Using a flat screwdriver pry and remove hinge caps.
To remove lid from case insert a flat screwdriver approx.
Use small flat screwdriver to remove night light lens.
See also
Remove the bottom hinge bracket cover with a flat screwdriver.
Use a flat screwdriver to lever and release the two plastic.
Once inserted it is necessary to use a flat screwdriver or a similar tool to remove it.
With the flat screwdriver end of the wrench provided rotate the.
Extract the lamp cover by using a small flat screwdriver or similar tool as a lever.
Use a flat screwdriver to carefully lift the cover of the battery compartment.
Release the rear cover using a flat screwdriver or another suitable tool.
Use a flat screwdriver and turn clockwise to guide the roller closer to the column.
Press off the battery cover with your thumb or using a flat screwdriver in the.
Use a flat screwdriver to pry out the shower screen and the group gasket.
The tension spring clamp can be opened with the help of a suitable flat screwdriver.
Pull the front grille up using the flat screwdriver and push towards the mounting plate.
Choose the desired brewing pressure by turning the adjusting screw with a coin or a flat screwdriver.
Open the door with a flat screwdriver and introduce the batteries with their negative side first.
Separate both halves of the Watch band or strap using a small flat screwdriver.
Use a flat screwdriver to release the fixtures in the openings 3.
You may need a Philips screwdriver or a common flat screwdriver to remove the fittings.
A small, flat screwdriver should be used for breaking the holes through.
If so, carefully remove them with a flat screwdriver.
To remove it, place a flat screwdriver underneath the nozzle and lift up.
A pair of pliers, a shifter and a flat screwdriver.
Using a coin or flat screwdriver in the notch on the door, open the access door.
We sharpen two planes, like a flat screwdriver.
You can use a small flat screwdriver to help disconnect the six-pin and two-pin connectors.
To do this, you will need a small flat screwdriver.
Introduce a small flat screwdriver into the calibrator ( CAL ) at the rear of the meter.
To remove the light cover, gently pry bottom edge with a flat screwdriver.
Figure 7A illustrates the use of a hexagonal flat screwdriver with the handle of the present invention.
Connect the wires to the wire block in the adapter using a 3 mm flat screwdriver.
Pry out the large fuse by placing a small flat screwdriver under the fuse 's end caps.
With a thin flat screwdriver twist it until the flame is ½ ” high.
Pry out the large fuse by placing a small flat screwdriver under the fuse 's.
Use a small, flat screwdriver to turn the channel selector to the desired position ., Parent unit.
You need a Phillips No. 2 screwdriver and a flat screwdriver to complete these procedures.
Use a flat screwdriver to move the three clamps holding the weights in place outwards FIG 4 ( A ) 2.
You'll also be interested in:
Examples of using Screwdriver
Show more
Use a screwdriver to loosen the air shutter
Always take away the screwdriver or similars
Use a screwdriver to secure all wiring connections
Examples of using Flat
Show more
Staying to the flat instead of the ridges
A flat battery must be recharged as soon as possible
Run batteries flat before removing them
