Examples of 'flat-blade screwdriver' in a sentence
Meaning of "flat-blade screwdriver"
A flat-blade screwdriver is a hand tool with a flat, narrow blade that tapers to a point at the end, which is designed to fit into the slot or groove of a screw head. It is commonly used to tighten or loosen screws with a straight-line groove, known as a slotted screw. Flat-blade screwdrivers come in various sizes and are essential for many household, automotive, and DIY tasks
How to use "flat-blade screwdriver" in a sentence
Basic
Advanced
flat-blade screwdriver
This may require a flat-blade screwdriver.
Use a flat-blade screwdriver to make adjustments.
Remove bottom portion of handles with a very small flat-blade screwdriver.
Use a small flat-blade screwdriver to remove.
Remove the power supply cable knockout using a flat-blade screwdriver.
Flat-blade screwdriver pliers ruler or tape measure.
A tool such as a small flat-blade screwdriver may be required.
A flat-blade screwdriver will be needed for removal.
Replace the battery of the digital thermometer using a small flat-blade screwdriver.
Use a flat-blade screwdriver and gently pry.
Remove screw plug at base of handle with a very small flat-blade screwdriver.
Use a flat-blade screwdriver and tighten the.
Hold valve stem with pliers and insert a small flat-blade screwdriver.
Use flat-blade screwdriver to attach clamp to rail.
Remove the cap from the gas pressure regulator using a flat-blade screwdriver.
See also
Use a flat-blade screwdriver to unfasten the screw.
Attach the pedestal to the scanner using a flat-blade screwdriver to tighten the captive screws.
Use a flat-blade screwdriver to loosen the air shutter.
Lift up clip on the oven bake burner electrode bracket with a finger or flat-blade screwdriver.
Use a small flat-blade screwdriver to turn the adjustment.
Tools needed for installation, level pliers utility knife wrench scissors flat-blade screwdriver.
Use a flat-blade screwdriver to turn the high flame.
Hold valve stem with pliers and insert a small flat-blade screwdriver into the shaft.
Use a flat-blade screwdriver to loosen the locking screw.
To separate the front and back covers, carefully insert and twist a flat-blade screwdriver between them.
Using a flat-blade screwdriver gently loosen the warming.
Remove the brush cap on the motor using a wide, flat-blade screwdriver.
Use a flat-blade screwdriver to exchange the phases as illustrated.
Open device's lid using a flat-tipped tool like a flat-blade screwdriver.
Use a small flat-blade screwdriver to remove plug strip from.
Note, For this step you need a flat-blade screwdriver.
Use a flat-blade screwdriver to tighten the screws against the.
Switch the instrument off 1 Lower the spring slide by inserting a flat-blade screwdriver as indicated ;.
Use a small flat-blade screwdriver to remove the timer panel.
Removing the battery safety strip: note: For this procedure you need a flat-blade screwdriver.
Use a flat-blade screwdriver to open the fuse compartment lid.
Hex-head socket wrench, 2 Phillips screwdriver, and a flat-blade screwdriver.
Insert a small flat-blade screwdriver into the hole in the.
Flat-blade screwdriver or 7 mm hex nut driver.
Insert a small flat-blade screwdriver into the valve stem.
Use a flat-blade screwdriver to turn the high flame setscrew counterclockwise approximate 90 degree.
Carefully insert a small flat-blade screwdriver between grille and lens . Pry lens out.
Use a flat-blade screwdriver to loosen the air shutter adjustment screw.
Insert a narrow, flat-blade screwdriver under the timing cam near the clock shaft.
Use a flat-blade screwdriver to turn the screw clockwise and loosen it.
Insert a small, flat-blade screwdriver into the valve shaft.
Use a flat-blade screwdriver to turn the battery compartment cover 90 counter-clockwise and remove the cover.
Use a small flat-blade screwdriver to remove the back of the timer.
Use a flat-blade screwdriver to remove the screw locking the bulb into place.
Insert small, flat-blade screwdriver into bottom of pushbutton and twist.
You'll also be interested in:
Examples of using Screwdriver
Show more
Use a screwdriver to loosen the air shutter
Always take away the screwdriver or similars
Use a screwdriver to secure all wiring connections
