Examples of 'flat-head screwdriver' in a sentence
Meaning of "flat-head screwdriver"
flat-head screwdriver - This phrase refers to a type of screwdriver with a flat, narrow tip, designed for turning screws with a single horizontal notch
How to use "flat-head screwdriver" in a sentence
Basic
Advanced
flat-head screwdriver
Preferably use a flat-head screwdriver to do this.
Wedge the fuse holder out of its housing with a flat-head screwdriver.
Use a flat-head screwdriver to remove the fuse holder.
Remove the fuse holder using a flat-head screwdriver.
Insert a flat-head screwdriver into the tube lock.
Remove the two caps with a flat-head screwdriver.
Insert a flat-head screwdriver into the hole in the impeller door.
Tighten the terminal screw with a flat-head screwdriver.
Wedge the tip of a flat-head screwdriver into the slot of the fuse.
Adjust the zero potentiometer to 40 mV using a small flat-head screwdriver.
Use a small flat-head screwdriver to remove hole plugs in the door opening.
Remove any track clips you need to replace with a large, flat-head screwdriver.
Using a flat-head screwdriver or similar tool push on the yellow plastic part in.
Remove both side knobs with a flat-head screwdriver as shown at left.
Use a flat-head screwdriver to work from left to right from the underside of the system.
See also
Replace the access cap with the flat-head screwdriver turning clockwise to tighten.
Use a flat-head screwdriver to remove the two hinge covers from the original side.
Now hand me that flat-head screwdriver.
Place the flat-head screwdriver into the groove between the halogen light glass covering.
Use needle-nose pliers and flat-head screwdriver to remove object.
Use a flat-head screwdriver to rotate the right screw counter-clockwise until the valve is fully open.
I am gonna need some tools, flat-head screwdriver and needle-nose pliers.
Use Flat-Head Screwdriver to tighten height rod to scale from the back see diagram 6b.
If they are not there, use a small, flat-head screwdriver to pry the case open.
Use the flat-head screwdriver and move the parallel bars off the roof of the car.
I know how to be decisive . Now hand me that flat-head screwdriver.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder and pry.
At the very least, I think vehicle owners should have a Phillips - and flat-head screwdriver.
A small flat-head screwdriver to adjust the AUX gain controls if you connect an MP3.
Required tools, flat-head screwdriver.
Flat-head screwdriver or multi-purpose tool provided.
Use a medium flat-head screwdriver or a T.
For the 78 RPM setting, tighten / loosen the screw using a flat-head screwdriver.
Insert a flat-head screwdriver or similar tool into the gap in the arrow area 1.
B From inside the door, insert a flat-head screwdriver into the badge release notch see Figure 1-9.
Insert a flat-head screwdriver into the slot ( Fa ) and lift up the Ni-MH battery.
Using the long-bladed flat-head screwdriver supplied in the tool kit, turn the switch a quarter of a.
Use a large flat-head screwdriver or a T-25 Torx screwdriver to partially tighten the screws.
Use a large flat-head screwdriver or a T-25 Torx screwdriver to loosen the.
Use a large flat-head screwdriver or a T-25 Torx screwdriver to.
You'll also be interested in:
Examples of using Screwdriver
Show more
Use a screwdriver to loosen the air shutter
Always take away the screwdriver or similars
Use a screwdriver to secure all wiring connections
