Examples of 'float switch' in a sentence
Meaning of "float switch"
A float switch is a device that is used to detect the level of a liquid (usually water) in a tank or container. It consists of a buoyant float that rises or falls with the liquid's level and triggers a switch to control a pump, valve, or other mechanisms. Float switches are commonly employed in water management systems, plumbing, and industrial applications
Show more definitions
- A sensor that detects the level of liquid in a tank and can react to changes in the measurement.
How to use "float switch" in a sentence
Basic
Advanced
float switch
Ice thickness float switch wire is disconnected.
Adjust the ice thickness float switch.
Ice thickness float switch is out of adjustment.
Immersion pump with integrated float switch.
The float switch cable may be damaged.
The condensation pump is fitted with a float switch.
Float switch circuits shall be intrinsically safe.
Ice thickness float switch is dirty.
A float switch is preferably used as level sensor.
Form a loop with the float switch cable.
The float switch is defective or jammed.
Periodically check that the float switch is operational.
Pull the float switch straight down to disengage.
Do not change the tether length of the float switch.
Disconnect the float switch wiring inline connector.
See also
Electric problem with the pump or the float switch.
Float switch does not trigger or does not switch off.
Check that the float switch is working see chapter.
Disconnect the wire lead from the float switch.
Harvest float switch wire is disconnected.
This contamination may also block the float switch.
Harvest float switch is out of adjustment.
Mounting the height adjustment for the float switch.
Pump float switch tether length.
Thus the appliance may comprise a magnetic float switch.
The float switch tether length is set at the factory.
Pump is running dry because the float switch is caught up on something.
If the float switch is closed the harvest cycle begins.
Automatic switch off when the float switch goes up for safety.
Automatic float switch is sealed and factory adjusted for.
The following illustration shows the fixed float switch cable.
Remove the float switch from the ice machine.
The oil disposal canister optionally also can be monitored by a float switch.
Fix the float switch so that it remains in an upright position.
Alerts can be tested by activating the pump with the float switch.
The float switch cable is attached to the pump housing.
Make sure that the float switch can move freely.
A float switch in the relay is used to initiate an alarm signal.
Magnetic reed switches are embedded in a vertical stem of the float switch device.
Make sure the float switch can move unrestricted.
The direct fluid entering onto the pump or float switch must be avoided.
Install the float switch and secure it in a suitable manner.
Make sure that no parts of the assembly interfere with the float switch.
Lower the float switch until the wiring connector is visible.
Single pump lifting station for biological filter supply with a level float switch.
Tank full float switch closing off the suction opening.
Remove the water tank from the base and unlock the float switch.
Check that the float switch is free from any obstacle.
The pump is out of vertical position so that the float switch can not move freely.
Automatic float switch is sealed and factory adjusted for most home.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Float
Show more
I float his boat and he sinks mine
Slightly press the float valve downward
The float in the water tank is stuck
