Examples of 'floor sensor' in a sentence
Meaning of "floor sensor"
floor sensor: Refers to a device or technology used to detect movement, weight, or other variables on a floor surface, often utilized for security, automation, or safety purposes
How to use "floor sensor" in a sentence
Basic
Advanced
floor sensor
Connect the floor sensor to the terminals.
Install one conduit for the floor sensor.
Floor sensor is included in the thermostat packaging.
Tap the type of floor sensor actually used.
The floor sensor must be centered in between the heating cable.
Optional extension of floor sensor cable.
Floor sensor not attached and thermostat in floor sense mode.
Forget to install the floor sensor included with the thermostat.
Use ordinary doorbell cable to extend the floor sensor cable.
Make sure only one floor sensor is connected to the control.
Minimum and maximum allowable setpoint temperatures of the floor sensor.
The floor sensor must be centred between loops of heating cable.
The underfloor heating will now be controlled by the signal from the floor sensor.
The optional floor sensor ensures that cold feet are history.
Comfort, control of floor comfort with external floor sensor.
See also
With the floor sensor having cold feet becomes history.
Electronic thermostat for heat - ing cable optional, floor sensor included with thermostat.
Floor Sensor wires may not be connected.
The reading from this secondary floor sensor will be used to monitor the overheat limit.
Floor Sensor may be wrong type.
Connecting the floor sensor / remote control.
Floor Sensor wires may be crossed.
If desired, the floor sensor cable can be extended.
Floor sensor is not wired properly, or is not working properly.
The room temperature, while the floor temperature * is simultaneously monitored by the floor sensor.
Note that changes to floor sensor characteristics may damage certain floors.
Fig . 6b presents correspondingly a continuous extrusion process for manufacturing a floor sensor according to the present invention.
Check Floor Sensor connections and mounting screws as stated above.
The first vehicle deceleration is a vehicle deceleration ( floor G ) obtained from the aforementioned floor sensor.
Presence & floor sensor connection available on new round flow cassette.
Setting hc10 to combined room and floor sensor Note.
If the floor sensor is disconnected or shortcircuited, the heating system is switched off.
Floor, With this setting, the floor sensor controls the heating system.
Presence & floor sensor settings available on fully flat cassette & round flow cassette.
Electrician, Check if the Floor Sensor wires crossed and shortcircuited.
The floor sensor must be connected to terminals marked “ sensor ”, terminals C and.
Connect the floor sensor see page 8.
Floor sensor installed in floor to be heated ( see Warmup heating product instructions for details ) 3.
Connect to 1st wire of floor sensor to terminal 1 colour not important.
Floor sensor ( FL ) Room sensor ( RO ) Combined use of room and floor sensor CO.
Connect to 2nd wire of floor sensor to terminal 2 colour not important.
Presence & floor sensor connections available on fully flat and round flow cassettes.
Floor, The floor sensor is used.
Check Floor Sensor resistance see Table 1 in the Installation section above.
Er 1 ( only at startup ) Floor sensor not correct type or out of range.
E2, Floor sensor short-circuited or disconnected.
Phase 1 - Preparations Floor sensor is included in the thermostat packaging.
Position the floor sensor in a pipe approximately half-way between two heating cables.
Position the floor sensor near the hc10.
Pull the floor sensor wire up the wall ( or conduit ) to the control location.
You'll also be interested in:
Examples of using Floor
Show more
The whole floor needs to be torn out
I got one patient dead on the floor
Floor area of dwelling per family member
Examples of using Sensor
Show more
Search for the sensor or check batteries
Sensor readings and radio communications are terminated
An integrated light sensor also measures brightness
