Examples of 'flow separation' in a sentence
Meaning of "flow separation"
Flow separation is a phenomenon in fluid dynamics where the flow of a fluid, such as air or water, separates from a surface or an object due to changes in pressure or velocity, creating turbulence and reducing efficiency
How to use "flow separation" in a sentence
Basic
Advanced
flow separation
This flow separation creates a low pressure área.
Longitudinal settler with flow separation.
Flow separation is often the result.
This phenomenon is called flow separation.
At higher speeds flow separation will occur at the step.
Flow separation occurs generally within the union region.
Both these effects help to delay or eliminate flow separation.
Such areas of flow separation are a particular problem in bifurcated lesions.
Experimental outcomes confirmed the potential to reduce flow separation.
All of these parameters reduce flow separation and greatly improve performance.
More divergence leads to excessive turbulence and flow separation.
These specific shapes also reduce flow separation and greatly improve performance.
Tufts can be used to gauge air flow patterns and flow separation.
This flow separation can result in a substantial loss in the efficiency of the turbine.
Upper internal nuclear reactor equipments including a flow separation device.
See also
The angles at flow separation and at flow reunion can be the same or different.
Another source of parasitic loss for a banded fan is flow separation at the band.
Flow separation creates two problems for the accurate measurement of total air temperature.
Such changes can lead to labile flow conditions or flow separation in the measure chamber.
The flow separation would increase the drag experienced on a body as gas moves past it.
Decreases in angle Φ increase the risk of flow separation.
High angles of attack and flow separation are typical for these types of flight conditions.
Quasi one-dimensional nozzles without flow separation.
Positive stalling Flow separation occur on the suction side of the blade.
Reduction / elimination of regions of flow separation.
Flow separation creates two problems for the accurate measurement of TAT.
Hence, it is desirable to minimize gas flow separation from the walls of a diffuser.
This flow separation causes the pressure to fluctuate, thus causing noise.
Segmentation is decided case by case, applying the general rules of traffic flow separation.
The exit angle causing flow separation is taken as identifying the limiting Coanda ring.
Boundary-layer suction is provided ahead of the opposite flap to reduce flow separation.
Therefore, flow separation can be suppressed throughout.
In addition, the large inlet flare allowed by this design minimizes flow separation.
In this way, flow separation and noise in this zone are controlled.
The rough or dimpled surface causes ' turbulence ' which delays or narrows the flow separation.
Thus, the occurrence of flow separation is suppressed, and the noise is reduced.
Optimized pressure distribution - ensures high efficiency of the propeller while suppressing flow separation losses.
We use a chip-based, continuous flow separation technique called deterministic lateral displacement.
The blade element method uses a panel method, which takes a flow separation into account.
Closed-loop control of flow separation has been applied numerically as well as experimentally on a flap.
The downwind sail shape is a non-developable surface with high curvature leading to massive flow separation.
This induces upper flow separation adjacent or at a minimum closer to the leading edge 20.
Flow through a sudden contraction of the pipe diameter, with flow separation bubbles near cross section 3.
In aerodynamics, flow separation can often result in increased drag and reduced lift.
As the Reynolds number increases, flow separation increases.
Hereby, flow separation along the lowermost part of the wedge-shaped cavity closure is prevented.
The shell is prolonged downstream by the flow separation ring 25.
Vortex generators delay flow separation and aerodynamic stalling thus improving the effectiveness of lifting / control surfaces.
A more turbulent boundary layer, in turn, delays the local flow separation.
Abstract, Corner flow separation may occur on airplanes at the wing / fuselage junction for instance.
You'll also be interested in:
Examples of using Separation
Show more
Total separation between product and propellant
Optical distortion and separation of secondary image
Separation of the judiciary from the executive
Examples of using Flow
Show more
I let the anger flow right through me
The flow of information is a two way street
Insufficient air flow through burn grate
