Examples of 'flow switch' in a sentence
Meaning of "flow switch"
A flow switch is a device used in various industries to monitor the flow of fluids or gases. It is designed to detect whether there is a change in the flow rate, and the switch is triggered to either open or close an electrical circuit based on this detection
How to use "flow switch" in a sentence
Basic
Advanced
flow switch
Reassemble the flow switch in reverse order.
Carefully mount the new flow switch.
Flow switch is not working properly.
Disconnect the electrical plug to the flow switch.
Flow switch in the water circuit of each evaporator.
Check the performance of the flow switch as follows.
Flow switch kit is available as an accessory.
Chilled water safety flow switch.
Water flow switch is optional.
Verify the pressure switch or flow switch operation.
The flow switch triggers at a preset flow volume threshold.
Be sure to turn on the upward air flow switch.
The flow switch senses water is passing through the unit.
Microwave flow switch.
Adjustable flow switch provides an alarm if volume flow is too low.
See also
The alarm may also appear if the flow switch is faulty.
Locate air flow switch and remove power pack cover.
The line blockage was removed and the flow switch was changed out.
The flow switch breaks if it is turned around with the nut.
Monitoring was achieved by the flow switch and the inlet meter.
A flow switch turns on the device when water flows through it.
This reinforced pivot enables the flow switch to be used in difficult conditions.
The flow switch protects only against a low total water flow.
The pumping group includes the chilled water safety flow switch.
Check that the flow switch is not clogged with dirt.
The installation of the analog flowmeter excludes the installatio of the water flow switch.
A thermal dispersion flow switch has two different temperature sensors.
Flow switch control could send reiterative signals to the main switch and.
The operation of the flow switch will now be described in more detail.
This parameter will display the Flow Switch status.
The gas flow switch provides for open cycle operation.
The MQ is equipped with both an internal flow switch and pressure switch.
Hold the flow switch in position when tightening the nut by hand.
This code displays the Flow Switch status.
A flow switch is a mechanical device and therefore has a potential for failure.
A second alternative to a traditional flow switch is a pressure sensor mounted in the water inlet pipe.
The flow switch senses how much water is passing through the unit.
SP Series is a thermal dispersion flow switch is a precise flow sensing device for liquids.
The flow switch stops the compressor if the water flow falls below a certain level.
This function is performed by a built-in flow switch.
Connect the flow switch wires in place of the water pressure switch wires.
Fluctuating water pressure and / or flow is causing the flow switch to cycle on and off.
The solution flow switch regulates the flow of chemical solution to the floor.
Two methods of flow protection are available, mechanical flow switch and electrical gas trap.
The water flow switch opens creating a fault and the heat pump shuts off.
The system can then comprise a flow detector or a flow switch 2 associated with a control unit.
This flow switch 2 detects whether or not there is a flow of water.
Magnetic reversal valve and expansion valve are included. Water flow switch is optional.
The magnetic flow switch in accordance with the invention includes,.
Water circuit . Without water pump and expansion tank, but with paddle flow switch.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Flow
Show more
I let the anger flow right through me
The flow of information is a two way street
Insufficient air flow through burn grate
