Examples of 'fluid needle' in a sentence
Meaning of "fluid needle"
In the context of medicine or healthcare, a 'fluid needle' refers to a needle that is used to extract or inject fluids into the body. It is often used in procedures such as drawing blood, administering medication or anesthesia, or performing injections. The needle is specifically designed to be able to pierce the skin and tissues while minimizing discomfort or damage
How to use "fluid needle" in a sentence
Basic
Advanced
fluid needle
Dry or loose fluid needle packing nut.
Fluid needle dirty or stuck in needle packing.
Wrong size fluid needle or fluid tip.
Replace fluid tip and fluid needle.
Fluid tip or fluid needle worn or damaged.
Fluid needle adjusting screw not open enough.
Tighten the fluid needle adjustment nut.
Fluid needle packing and nut.
Air is drawn from fluid needle packing set.
Turn fluid needle adjusting nut counterclockwise to increase fluid flow.
Check and tighten fluid needle packing nut.
The fluid needle packing in this gun may be loose when received.
Clean or replace fluid nozzle and fluid needle set.
Open fluid needle adjusting screw.
Remove fluid control knob and the fluid needle spring.
See also
Loose fluid needle packing nut.
Loosen packing nut just enough so the fluid needle moves freely.
Loose fluid needle adjustment nut.
Keeping fluid control screw in open position will reduce fluid needle wear.
Fluid nozzle and fluid needle set are not seated properly.
Turn fluid adjusting knob clockwise or switch to smaller fluid tip and fluid needle size.
Tighten packing nut until fluid needle starts to bind in the packing.
The fluid needle seal is effected by a Teflon packing with self-tensioning compression spring.
Gun lube is used to lubricate the fluid needle packing and trigger pivot point.
Turn the fluid needle adjusting knob counterclockwise to increase fluid flow.
Shut off fluid flow through gun by turning fluid needle adjusting screw clockwise.
Turn the fluid needle adjusting knob clockwise to decrease fluid flow.
Hold the trigger back and gradually open the fluid needle adjusting screw until a.
Turn the fluid needle adjusting knob counterclockwise until a full coat is obtained.
Air escapes from fluid needle Tighten.
NOTE, Assemble fluid nozzle before putting in fluid needle.
Remove and check fluid needle for excessive wear at the tip and straightness.
NOTE, Assemble fluid nozzle before fluid needle.
Paint emerges from fluid needle - needle sealing.
A set includes an air cap, fluid nozzle, and fluid needle.
Fully open fan and fluid needle controls turn counter-clockwise.
Fluid needle 74 comprises part of a fluid valve for control of pressurized fluid through spray gun 12.
Never damage fluid nozzle tip, fluid needle or air cap holes.
Repair, Clean fluid needle and fluid nozzle in thinner or use new set nozzle.
Turn fluid adjusting knob ( 20 ) clockwise to prevent fluid needle movement.
The fluid needle packing ( 8 ) should be kept soft and pliable by periodic lubrication.
As the trigger 40 is pulled back further, the fluid needle 60 is retracted rearward.
Remove fluid needle adjusting knob ( 7 ) to relieve spring.
Trigger 48 is connected to a fluid valve see fluid needle 74 in FIG.
The fluid needle 43 is biased by a needle spring 46 in a closed position.
You'll also be interested in:
Examples of using Needle
Show more
Wait until the needle totally stops
This needle bearing must be lubricated regularly
It may deflect the needle causing it to break
Examples of using Fluid
Show more
Only use hydraulic fluid in the cylinder
The fluid was too thick for a pericardiocentesis
Do not expose the fluid to an ignition source
