Examples of 'flush valve' in a sentence
Meaning of "flush valve"
A flush valve is a plumbing device that controls the flow of water into a toilet or urinal. It is typically located at the bottom of the toilet tank and is operated by a lever or button. When the flush valve is activated, it opens to allow water to enter the bowl, flushing away waste
How to use "flush valve" in a sentence
Basic
Advanced
flush valve
The flush valve is controlled by level switches.
Flushing systems made of a manual pressure flush valve.
A common type of flush valve is a diaphragm flush valve.
Blockage usually at base of toilet below flush valve.
The flush valve also includes a retaining ring.
In all other steps the flush valve will be closed.
The flush valve and the inlet valve are closed.
He did fix your flush valve.
The flush valve can be controlled on the basis of conductivity.
A further need exists for a flush valve having improved sealing features.
The flush valve can also have an improved overflow.
The fourth line led into an extract valve and a flush valve.
The flush valve can also include a retaining ring.
The third line led into a desorbent valve and a flush valve.
The flush valve and dosing outputs will be switched off.
See also
Optionally the flush exit may be controlled with a dedicated flush valve.
The flush valve is open and the inlet valve is closed.
Enter the MultiRanger relay number of the pump with the flush valve.
Unpack the new flush valve and scan the directions.
The second of these lines led into a raffinate valve and a flush valve.
Optionally flush valve may be controlled by the position of the fluid diverter.
The first of these lines led into a feed valve and a flush valve.
Optionally the flush valve and fluid diverted may be controlled concertedly.
First you want to go to the store and buy a new universal flush valve.
The main reverse flush valve is powered by its own internal gas pressure.
In another aspect the invention provides a combined flush valve assembly and toilet tank.
The flush valve can also include an infrared sensor and a radio frequency chip.
Without tank With flush tank With flush valve.
The permeate flush valve remains closed while the conductivity is below the defined limit.
Flushing systems made of a contact-free pressure flush valve.
Another part of the flush valve that can have low flow efficiency is the overflow.
Alternatively, water may be supplied directly via a flush valve or " flushometer.
This pathway runs from the flush valve and through the vitreous path of the bowl.
Now, the concentrate flows out of the outlet at closed flush valve.
The flush valve connects to Relay Four and the watched pump is on Relay One.
The invention provides a flush valve assembly for one-piece toilets.
A flush valve for a plumbing fixture comprising:.
Thus, a need exists for a flush valve with improved flow characteristics.
Switches to a existing urinal with a new, powerful and water-absorbing flush valve.
If the flush valve is opened, then the dosing is active.
The input valve and the concentrate flush valve are opened in stage 1.
If no flush valve is present, disconnect line from equipment to flush to drain.
The dumping valve includes a membrane housing, and a rod connected to a flush valve.
The flush valve can be controlled on the basis of volume and / or conductivity.
If the conductivity rises above this value, then the flush valve will be opened.
This causes the flush valve to remain open, resulting in constant water flow.
When the mixture reached the desired temperature, a sample was taken through the bottom flush valve.
Afterwards, the flush valve can be remounted and the unit is ready for next production.
See our FAQ titled, How to replace a flush valve on a two piece toilet.
The flush valve is controlled depending on the measured Conductivity 2.
