Examples of 'foam density' in a sentence
Meaning of "foam density"
foam density ~ the measure of how compact or dense a foam material is
How to use "foam density" in a sentence
Basic
Advanced
foam density
Foam density and compressibility not tested.
Reduction of silicone foam density using buffers.
Foam density is measured with a suitable density determination apparatus.
The product of foam density and cell size.
High water contents permit a lower foam density.
Consistent foam density to ensure complete.
The nitrogen was controlled to provide the desired foam density.
Foam density can be adjusted.
The content of azodicarbonamide can be used to determine foam density.
Foam density is determined in part by controlling the vacuum level.
It can also be deduced from the foam density measurement.
The foam density is of importance in the performance of this invention.
Additional blowing agents are useful for decreasing foam density.
Foam density will vary according to the state of the foam.
The following equation was used to calculate a foam density value.
See also
Method for reducing silicone foam density and silicone foam compositions.
The force of elongation is also influenced by the foam density.
Such settling leads to higher foam density and poorer cell structure.
The use of processing aids also assists in lowering foam density.
They adjust the foam density and the spring tension to your body type.
Lowering of the pressure can be used to increase the foam density.
Foam density is controlled varying the ratio between air amount and latex throughput.
The penetration depth can be effectively regulated by the foam density here.
Table 1 relates the foam density and open cell content with the foaming temperature.
The concentration of the blowing agent may be varied to alter the foam density.
A method for making silicone foam having a reduced foam density comprising rapidly mixing a mixture of.
The pressure generated by the high pressure pump is a function of the foam density.
As noted earlier, a low foam density is desired.
A skilled person can determine the right amount of blowing agent for an intended foam density.
Density measurements have shown that a quite uniform foam density was achieved in the article.
Density, Foam density can be measured on dry, expanded foams using any reasonable method.
Compressive strengths are surprisingly high, especially when normalized to foam density.
Further, from the obtained molded foam, the foam density was measured and compared.
The foam properties were determined by ASTM methods as follows, Foam density.
Sometimes little things like seat-cushion foam density can make or break an economy-class experience.
Moreover, only products exhibiting a restricted rectangular cross-section and a high foam density can be produced.
Custom designed? They adjust the foam density and the spring tension to your body type.
For instance, at a high polystyrene melt flow index, the foam density is also high.
The foam density is measured after 30 seconds in duplicate.
Blends of polystyrene and ethylene / styrene interpolymer yield similar foam density reductions in a steam chamber.
This can effect foam density and foam rebound ( index of elasticity of foam ).
No reduction in volume was observed over a period of 30 minutes, but the foam density reduced.
These materials increase foam density and often adversely affect physical properties . - Cell-Openers.
Conversely, as the CO2 or phase changing material concentration increases, the foam density decreases.
Furthermore, a foam density of significantly below 25 Kg/m3 is obtained without using chlorofluorocarbon blowing agent.
The method of item 1 wherein the foam density is about 8 Kg/m3.
They adjust the foam density and the spring tension to your body type . Custom-designed?
Home » EVA foam Info » foam density.
Accordingly, when the foam density is 75 %, an extraordinarily wind resistant fabric is produced.
A foam density of 2 - 5lbs is most common, and anything over 5lbs is considered high quality.
You'll also be interested in:
Examples of using Foam
Show more
The majority of foam that we see is natural
Foam fill pipe with level regulation
The insulation foam contains flammable gases
Examples of using Density
Show more
Reduces bulk density and increases porosity
Density and volume under changes in temperature
Measure the particle density of the thermosphere
