Examples of 'foam samples' in a sentence
Meaning of "foam samples"
foam samples ~ small pieces or examples of foam material for testing, evaluation, or demonstration purposes
How to use "foam samples" in a sentence
Basic
Advanced
foam samples
Compressive strength is also measured on the foam samples.
Molded polyurethane foam samples were prepared using the following procedure.
These various tests were also performed on latex foam samples.
Core foam samples were cut from the panel for testing.
Cream, initiation, gel and tack free times were recorded for the individual polyurethane foam samples.
Core foam samples were then cut out of the centre of the foam.
Cream, initiation, gel and tack free times are recorded for the individual polyurethane foam samples.
The foam samples were tested in the tensile direction using a dog bone shape sample.
The properties of the foam samples are shown in Table 1 below.
Foam samples are prepared using hand-mixing techniques.
Laminate and thick foam samples are measured on both side-edges.
Materials JAYCO synthetic urine ; foam samples.
The foam samples were stirred to remove gas / air bubbles.
The same trends were observed when foam samples were exposed to U. V.
Two reference foam samples were prepared from un-doped polyisocyanate.
See also
In the manner described in Example 1 above, dispersions, froths and foam samples are prepared.
After demolding, the foam samples were thoroughly crushed to open the cell windows.
The isocyanate index is kept constant at 1.15 for all the foam samples prepared.
The foam samples produced by the pseudo-accumulating extrusion were used to determine dimensional stability.
A total of 36 different fabrics and foam samples were tested from the 18 car seats.
The dry foam samples are each weighed to determine a dry weight ( dw ).
The expanded starch foam samples were tested for shrinkage as shown in following Table 1.
The foam samples and Jayco synthetic urine are equilibrated to a temperature of 31°C.
The final weight of the foam samples W6 was used to calculate the absorbency g / g = EPMATHMARKEREP.
These dry foam samples are each weighed to determine a dry weight ( dw ).
Fig . 3 shows a diagram of foam samples produced using a single-step injection-moulding foaming process ;.
The uncrosslinked foam samples were uniaxially oriented at a ratio of 6:1 at room temperature.
All of the foam samples are then dried in air for about 16 hours.
Foam preparation Foam samples were made in an open polyethylene bag of dimensions 170 mm x 430 mm.
You'll also be interested in:
Examples of using Foam
Show more
The majority of foam that we see is natural
Foam fill pipe with level regulation
The insulation foam contains flammable gases
Examples of using Samples
Show more
I brought back samples of her root that
Samples should be related to the proposed project
Please take my samples back with you
