Examples of 'foot controller' in a sentence
Meaning of "foot controller"
a device or pedal used to control or operate various functions or actions, typically with the foot
How to use "foot controller" in a sentence
Basic
Advanced
foot controller
Slowly activate foot controller to begin sewing.
Never place anything on the foot controller.
Connecting foot controller and power cord.
Lay your foot on the foot controller.
The foot controller has a plurality of switches.
Slowly depress the foot controller to sewing.
Push foot controller plug into the jack on.
Do not place a thing on the foot controller.
Plug foot controller into power supply socket.
This is where the midi foot controller comes in.
Foot controller is not used correctly.
Start the winding by pressing the foot controller.
Connect the foot controller with the machine c.
Speed will be control by foot controller.
Handle the foot controller with care and avoid.
See also
There is electricty handspike or foot controller for choice.
Insert the foot controller plug into the corresponding inlet.
Stop control and foot controller.
Place foot controller at your feet and turn on power switch.
Be treated as if they had been produced by the foot controller.
We recommend attaching the foot controller and sewing at a consistent speed.
The foot controller part code differs depending on the country or region.
You have not used the foot controller properly.
This foot controller can be used on the following machine models.
The machine will stop when foot controller is released.
Handle the foot controller with care and avoid dropping it on the floor.
Be sure that nothing is placed on the foot controller when the.
Unplug the foot controller of the appliance before carrying out any maintenance.
Hold back both threads and press the foot controller pedal.
Connect foot controller with machine and plug in machine with main socket.
A control cable must be connected from each bar to the foot controller.
Pull the plug of the foot controller out of the machine.
Do not allow pieces of cloth and dust to build up on the foot controller.
Do not put anything on the foot controller because the machine may.
Turn the hand wheel and press down the foot controller.
Do not place anything on the foot controller which is set to the sewing machine.
Hold the end of the thread and step on the foot controller.
The foot controller was pushed down to start sewing before the presser foot was lowered.
Accidentally start and the motor or the foot controller may overheat.
Pull the foot controller plug out of the machine before inserting the needle.
The optional trim trap can also be used as the foot controller holder.
Foot controller input foot controller CLMPARFOOT optional.
Use dry rags to remove dust from the sewing machine and foot controller.
The DMX foot controller serves for operation of.
Hold the end of the thread and start the machine by pressing foot controller pedal.
As the foot controller is pressed further, the machine will increase speed.
Hold the upper thread and bobbin thread loosely and press the foot controller.
Press the start / stop button or foot controller to sew stored stitches.
If you want to stop the winding earlier, release the foot controller.
When the foot controller is pressed lightly, the machine runs at a low speed.
You'll also be interested in:
Examples of using Foot
Show more
The correct presser foot is not being used
The foot pressure is not adjusted properly
And the other foot stays in front
Examples of using Controller
Show more
The controller is then basically ready to use
Verify the temperature controller is functioning properly
The controller chafes after several hours
