Examples of 'foot holder' in a sentence
Meaning of "foot holder"
The phrase 'foot holder' does not have a commonly recognized definition in English. It could be a typographical error, a misheard phrase, or a term specific to a certain field or context. More information is needed to provide a specific definition
How to use "foot holder" in a sentence
Basic
Advanced
foot holder
If the presser foot holder is not correctly.
Use a coin to remove the presser foot holder.
Lower the sewing foot holder into the button.
Press the lever q on the back of the foot holder.
Lower the foot holder to lock the foot in place.
Removing the presser foot holder.
Lower the foot holder to lock the foot into place.
Attaching the presser foot holder coloçãsao.
Loosen the presser foot screw to remove the presser foot holder.
Remove the presser foot holder and the needle.
Use the screwdriver to tighten the presser foot holder.
Remove the presser foot holder and attach gathering foot.
Lies just under the groove of the foot holder.
Align the hole in the foot holder w with the threaded.
Press the lever located on the back of the foot holder.
See also
Lift the pressure foot holder up by moving the pressure foot holder upwards.
Attach the zipper foot so that the presser foot holder.
Match the hole in the foot holder with the threaded hole in the presser bar.
Use the oval screwdriver to remove the presser foot holder.
Match the hole in the foot holder w with the threaded hole in the presser bar e.
Attach right side of zipper foot to foot holder so that needle.
Remove the setscrew by turning it counterclockwise with a screwdriver and remove the foot holder.
And then tighten the screw of the presser foot holder by using screw driver.
Raise the presser bar and turn the setscrew counterclockwise to remove the foot holder.
Raise the foot holder until the bracket makes contact with the rail snap button.
Slide quilter guide arm through hole on top of presser foot holder.
Remove the presser foot holder by unscrewing ( counterclockwise ) the presser bar attaching screw.
Place the desired foot on the needle plate under the foot holder.
When you lift the presser foot holder again, the foot will be securely attached.
Use the oval screwdriver to tighten the presser foot holder screw securely.
Lower the foot holder to lock the foot in place . w Groove e Pin.
Slide the arm through the hole on top of the pressure foot holder.
The screw of the presser foot holder is available through your authorized dealer . Part code.
Push in the right rail snap button to lower the adjustable foot holder.
Remove the foot holder . q Setscrew w Foot holder.
Lower the presser foot lifter so that the foot holder snaps on the foot.
Attach the presser foot holder ( b ) to the presser foot shaft ( c ) and tighten the bolt a.
Fit the pin on the zipper foot into the groove on the foot holder.
Attach the presser foot holder ( b ) as illustrated.
Place the presser foot pin right under the groove of the foot holder.
Lower the presser foot holder ( b ) and the presser foot ( f ) will engage automatically.
Turn OFF the power switch before detaching or attaching the foot holder.
Lower the presser foot holder ( b ) until the cut-out ( c ) is directly above the pin d.
Attach the automatic buttonhole foot R snapping the pin w into the groove q of the foot holder.
Attach the automatic buttonhole foot R snapping the pin into the groove of the foot holder.
Remove presser foot screw, presser foot and foot holder.
To sew down the left side, attach right side of foot to foot holder.
Lift presser bar, remove presser foot clamp screw and presser foot holder.
Preparation for Monogramming and Embroidering * - Remove the presser foot and the presser foot holder.
You'll also be interested in:
Examples of using Foot
Show more
The correct presser foot is not being used
The foot pressure is not adjusted properly
And the other foot stays in front
Examples of using Holder
Show more
Support file holder on cutter top plate
Holder advertising material itemnumber price per
This battery holder part is not waterproof
