Examples of 'frequency of the signal' in a sentence
Meaning of "frequency of the signal"
Frequency of the signal is a phrase used in the context of telecommunications or electronics to denote the rate or number of times a particular signal waveform or oscillation occurs within a specified time period. It is a measurement of the number of cycles or repetitions of the signal per second and is often expressed in hertz (Hz)
How to use "frequency of the signal" in a sentence
Basic
Advanced
frequency of the signal
This frequency is the frequency of the signal.
The frequency of the signal in use.
It fact it must change the frequency of the signal.
The frequency of the signal indicates the ethanol percentage.
Dunlop monitored the frequency of the signal on the wire.
The frequency of the signal depends on the position of the target.
Display will show the frequency of the signal found.
The base frequency of the signal emitter must therefore be chosen well below.
The period m is the reciprocal of the frequency of the signal h.
Sets the frequency of the signal from the internal oscillator.
The dipole that is driven depends on the frequency of the signal.
Colour and frequency of the signal.
The attenuation of the signal is highly dependent on the frequency of the signal.
Next is the frequency of the signal.
This communication requires extensive upshifting and downshifting of the frequency of the signal.
See also
Fs sampling frequency of the signal.
This converts the frequency into shaped pulses which relate to the frequency of the signal.
The frequency of the signal is inferred by the series of selected anticipated times generated.
Then the user knows the true frequency of the signal.
The frequency of the signal tone increases as the vehicle draws closer to the obstacle.
This will allow you to visualize the frequency of the signal.
Both the frequency of the signal and the absorption strength have to be carefully calibrated.
This series resonance circuit is tuned to the frequency of the signal oscillator.
The frequency of the signal was directly proportional to the RPM.
The variable has a prescribed relationship to the frequency of the signal component.
The frequency of the signal fVCO is proportional to the current I.
That minimum time is inversely proportional to the frequency of the signal being processed.
Is the frequency of the signal to be filtered ;.
Where Ao is the maximum amplitude and w the frequency of the signal.
Set the resolution and the frequency of the signal of the connected computer within the.
A DMMs ability to measure AC voltage can be limited by the frequency of the signal.
Frequency of the signal obtained at output of the intermediate frequency signal 13.
In this manner, it is possible to double the sampling frequency of the signal w 1.
The frequency of the signal varies from one rate-setting period to another.
Third, the information about the instantaneous frequency of the signal is eliminated.
In this embodiment, the frequency of the signal without aliasing is outputted in a compressed form.
Hence, the filter response changes as a function of the frequency of the signal.
The frequency of the signal available at the output 5 is therefore increased with a large increment.
For example, in certain embodiments the frequency of the signal may be held constant.
The frequency of the signal is fixed, the central processing unit 3 varies the duty cycle.
The signal thus decoded is oversampled by the module 62 at the frequency of the signal.
Estimating at least one high cut-off frequency of the signal decoded by the core decoder ;.
Frequency roll-off is the degree of attenuation dependent upon the frequency of the signal.
The frequency of the signal changes rapidly over time according to a pre-defined pseudorandom sequence.
Second frequency-changing means for transposing a second frequency of the signal to zero ;.
The frequency of the signal HF used is 8 GHz.
Third frequency-changing means for transposing a third frequency of the signal to zero ;.
The higher the frequency of the signal Fi, the faster the instantaneous phase rotates.
First frequency-changing means for transposing a first frequency of the signal to zero ;.
Consequently, the frequency of the signal SSR1 is always smaller than the shift frequency fd.
You'll also be interested in:
Examples of using Frequency
Show more
Adjusts the higher frequency of the sound
The frequency of armed conflicts is on a downward trend
The desired station frequency is not tuned in
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
