Examples of 'friction coefficients' in a sentence
Meaning of "friction coefficients"
Friction coefficients refer to the ratio of the force of friction between two objects to the force pressing them together. They are used in physics and engineering to determine how easily two surfaces slide past each other
How to use "friction coefficients" in a sentence
Basic
Advanced
friction coefficients
These are typically elevation data or friction coefficients.
Dynamic friction coefficients and their tolerance bands.
We make a distinction between static friction coefficients and kinetic.
The average friction coefficients are related to the roughness.
The trend to reduce drive sizes by reducing friction coefficients.
Friction coefficients between transverse surfaces.
This paper presents the results obtained in terms of friction coefficients.
The friction coefficients that were used are also included.
A little bit of water on the plank would locally make the friction coefficients larger.
Static friction coefficients are larger than coefficients of kinetic friction.
A combination of the wedge angle and the friction coefficients of the material determine this limit.
Friction coefficients of polyacrylamide gels are routinely know to a person of skill in the art.
All different materials have friction coefficients tailored to the intended application.
This is a serious problem since toner and its additives can affect the friction coefficients.
And nominal value of the friction coefficients used by friction brake equipment.
See also
The testing protocol is a relatively standard test in the wiper industry for testing friction coefficients.
The proportionality of friction coefficients to compression stress was evaluated by using a regression analysis.
Sliding - determination of friction coefficients.
In general differences in friction coefficients between nitrided and hard chromium plated specimens were small.
During the materials running-in, different behaviors of the friction coefficients were found.
The study determined the effect on friction coefficients between materials by increasing compression stress.
Friction coefficients were calculated from the slopes of the frictional force / normal force plots.
After testing, the force curve is used to calculate the static and dynamic friction coefficients.
The friction coefficients of the compounds are indicated in the following Table.
Each test results in the determination of two quantities, the static and kinetic friction coefficients.
The friction coefficients are as follows,.
This tester measures the static and dynamic friction coefficients of paper, corrugate and films samples.
The friction coefficients needs to be around or below 0.005 for ice skating to be possible.
The more efficient the algorithm is, higher the friction coefficients from tire-runaway interaction will be.
FIG . 7 is a graph showing friction coefficients for comparative samples and embodiments of the present disclosure.
This results in surfaces with very low friction coefficients [ 10 ].
Therefore, the values of the friction coefficients are different from those shown in Table 1.
USE, Instruments to determine friction coefficients and critical angles.
Each of the friction coefficients 23 can be set more finely.
The mean value [ Mv ] of the obtained friction coefficients is evident from Table 1.
The fiber-to-fiber friction coefficients shown in Figure 3 were obtained using the following procedure.
Low wear, low friction coefficients.
You'll also be interested in:
Examples of using Coefficients
Show more
We find that three coefficients are statistically significant
Coefficients for determining measuring rim width
Adjusting the weighting coefficients for slaughtering
Examples of using Friction
Show more
Little friction in the marriage right now
Do not breathe in the friction lining deposits
Friction between rollercase and side panels
