Examples of 'front leveling' in a sentence
Meaning of "front leveling"
This phrase typically refers to the process of adjusting or aligning the front section of a vehicle, such as a car or truck, to achieve a balanced or equal position. It is commonly used in the context of automotive repairs, maintenance, or modifications to ensure proper suspension, handling, or tire wear on the front wheels
How to use "front leveling" in a sentence
Basic
Advanced
front leveling
Turn to lower the front leveling leg.
Front leveling legs need adjusting.
To adjust the front leveling legs.
Front leveling legs should rest firmly on the floor.
Check that front leveling legs.
The front leveling legs are extended below the front rollers to improve stability during placement.
Remove both front leveling legs.
MYTH Front leveling legs are adjustable and should be used to balance the refrigerator.
Slide front cylinders up to adjust front leveling legs.
Adjust front leveling legs until the range is level.
Unique dual blade in the front leveling board.
Use the front leveling legs to make sure the product is level.
Use the supplied wrench to turn the front leveling legs.
Adjust the lower front leveling legs to the required height.
Level the Washer Install the front leveling feet.
See also
Use pliers to lower front leveling legs away from compactor cabinet.
To level the unit, adjust the front leveling legs.
Locate the two front leveling legs taped among the packing.
Your refrigerator has two adjustable, front leveling screws.
Make sure the front leveling legs are also at their highest position.
If the washer is not level, adjust the front leveling legs.
Adjust the front leveling legs up or down to ensure the washer is resting solid.
Use a wrench or pliers to lower front leveling legs one-half turn.
The front leveling legs need adjusting, or floor is weak or uneven.
To level the front of the washer, adjust the front leveling legs by.
Completely retract the front leveling legs to allow the unit to be moved into position.
If washer is not level, tilt washer back to access the front leveling legs.
Your refrigerator has two front leveling legsone on the right and one on the left.
It is most effective to install the non-skid pads under the front leveling feet.
Locate the 2 front leveling legs taped among the packing.
See the Rollers section . rattling front leveling legs need.
Front leveling feet with jam nuts 2.
This is accomplished by adjusting the front leveling leg, located under the refrigerator.
Adjust front leveling legs until washer is level from side-to-side.
Use channel lock pliers to lower front leveling legs one-half turn.
Your refrigerator has 2 front leveling screws - one on the right and one on the left.
Follow the steps outlined in “ To adjust the front leveling legs ” earlier in this section.
Rotating the left front leveling leg will result in the opposite effect . See also “ Step 9.
To level your refrigerator, adjust the front leveling leg at the bottom of the refrigerator.
The rear leveling wheels and front leveling legs are limited to a maximum height adjustment of 1.
To level your appliance, adjust the front leveling leg at the bottom of the unit.
To level your Appliance, adjust the front leveling legs at the bottom of the Appliance.
This is accomplished by adjusting the ( 2 ) front leveling legs, located under the refrigerator.
See Rollers . ( slight vibration front leveling legs need is normal ) adjusting.
To do this, turn the front leveling screws clockwise ¹ ⁄ ₂ turn.
You'll also be interested in:
Examples of using Leveling
Show more
Adjust leveling legs until refrigerator is level
Tighten nuts to lock leveling foot in place
Adjust leveling legs to the approximate height
Examples of using Front
Show more
Acting all brave in front of your cousins
Front of flange even with front of surface
Found your car in front of his apartment
