Examples of 'full cure' in a sentence
Meaning of "full cure"
full cure: This phrase is used to describe a treatment or solution that completely resolves a problem or illness, leaving no remaining symptoms or issues
How to use "full cure" in a sentence
Basic
Advanced
full cure
The reaction then proceeds to full cure.
On full cure the resin is a hard homogeneous solid.
Never fill the aquarium until full cure.
Persists without full cure or worsens over an extended period of time.
Although some need an elevated temperature to achieve full cure.
The reaction then proceeds to full cure with the increase in temperature.
Treatment is simple excision of the lesion which promotes full cure.
Full cure can also be determined by measuring the amount of unreacted acrylate groups.
These conditions were sufficient to ensure full cure of the epoxy phase.
Full cure can be determined by measuring the hardness of the material with a durometer.
All most people need is a quick course of antibiotics for a full cure.
Typically full cure is obtained after about 7 days room temperature conditions.
The post cure may not achieve full cure of the resin.
Determine the quantity of sample required by estimating the number of days to a full cure.
The fact that only the GLY sample achieved full cure can be seen from Figures 3-4.
See also
The composition according to claim 1, wherein the composition after full cure has.
A full cure will be achieved in 12 hours.
Use of a keyed composite reinforcing member greatly increases the probability that full cure will occur.
Full cure at room temperature is realised after 48 hours at 16 MPa.
It 's the only way to bring about a full cure.
It is easy to apply and achieves full cure at room temperature in 20-30 minutes.
It 's important to note that this is not a full cure.
Full Cure 3 days.
The coating sat undisturbed for 7 days at room temperature to allow for full cure.
The heat treatment at step 110 results in a full cure of the partially cured pins 40.
Expose the joint to ultra-violet light for the appropriate time to ensure full cure.
In addition, a remarkable 40 % of the participants had full cure by end of the third day.
Low to zero VOCs during installation and completely inert, with no emissions, after full cure.
Adhesive will reach initial cure in one hour and full cure in 6-8 hours.
In dry air allow 72 hours at room temperature for full cure or,.
Immediately after the irradiation, the full curing is tested in a REL full cure testing device.
You'll also be interested in:
Examples of using Cure
Show more
Allow the sealant to cure before proceeding
This cure is gonna change so many things
They will find a cure in the future
Examples of using Full
Show more
The world was full of startling new concepts
Full transition to new system of administration of justice
They are always full of coy little tricks
