Examples of 'fully tightened' in a sentence
Meaning of "fully tightened"
fully tightened: 'Fully tightened' means to make something completely secure, taut, or firm, often referring to the tightening of a screw, bolt, or any other fastening mechanism
How to use "fully tightened" in a sentence
Basic
Advanced
fully tightened
Regulator not fully tightened into cylinder.
Trailercycle frame coupling bolts are fully tightened.
Assembly will be fully tightened in next step.
The water line connections were not fully tightened.
Check blade unit is fully tightened into the goblet.
Some threads will be visible even when fully tightened.
Be certain the knob is fully tightened before operating equipment.
Ensure that the cable gland is fully tightened.
They must however be fully tightened again when connections have been made.
Make sure that the screw is fully tightened.
The fully tightened non-slip knot is easily formed from the partially tied knot.
Be certain the knob is fully tightened before.
Periodically check the connection to ensure that the coupling is fully tightened.
Be sure that both knobs are fully tightened and are at equal heights.
Ensure that all the fastening points are fully tightened.
See also
Ensure that the screws are fully tightened to prevent damage to the scale.
Make sure the connector locking ring is fully tightened.
Screws must be inserted straight and fully tightened to ensure correct operation of bolts.
The retention system is partially but not fully tightened.
All bolts must be fitted, and fully tightened to the torque figures specified.
Remove grill and check that all screws are fully tightened.
Water line connections are not fully tightened - Make sure all connections are firmly tightened.
Do not release the display until the knob is fully tightened.
Then, the fastener 97 is fully tightened to provide a firm connection.
Do not release the display until both tilt knobs are fully tightened.
Check that the plastic nut is fully tightened to avoid vibration.
Camera should be adjusted for optimum view before these screws are fully tightened.
Jaw spreader housing 1 must be fully tightened onto head piston 5 before tightening locknut 3 against it.
Make sure that all the terminal block screws are fully tightened.
The screw 100 can then be fully tightened to urge the implant against the cervical vertebrae.
We recommend always checking that the nuts have been fully tightened during installation.
Tighten jaw spreader housing 1 fully tightened onto head piston 7 BEFORE tightening locknut 3 against it.
Make sure that the tools are correctly inserted and fully tightened or well screwed.
The setting is correct when the tester just illuminates as the switch is fully tightened.
Bolt ' A'should be fitted and fully tightened before bolt ' B ' is assembled.
The two small openings on the tank fitting must be facing up when fully tightened.
Bolt ' A ' should be fitted and fully tightened before bolt ' B ' is assembled.
Make sure that the mechanical locking systems on the various adjustment devices are fully tightened.
Ensure screws are fully tightened.
Ensure that the Battery Cover is installed and fully tightened.
Ensure all screwed connections are fully tightened at all times.
During shipping, the wheel adjustment knobs are fully tightened.
Tighten the screw that was not fully tightened in step 3.
Make sure the Plug-it connector is properly inserted and fully tightened.
Wood screws are not fully tightened.
Once all of the sectors are in place, the bolts 15 are fully tightened.
Always ensure that the handles are fully tightened when in use.
Perform 3 turns on each screw, then repeat until all are fully tightened.
Check that the safety nut on the valve tappet is fully tightened secured with Loctite.
Slide the collar ( 15 ) down and rotate it clockwise until it is fully tightened.
You'll also be interested in:
Examples of using Fully
Show more
Neither side fully respected the agreement
Fully clean the parts with water
The batteries should be fully recharged afterwards
Examples of using Tightened
Show more
Tightened tolerances for improved metrology performance
Stripped or poorly tightened motor thru bolts
He tightened the noose around all of them
