Examples of 'further stirring' in a sentence
Meaning of "further stirring"
further stirring - This phrase typically refers to continuing to mix or agitate a liquid or substance. It can also be used metaphorically to describe increasing a situation or emotion. For example, 'The protestor's speech provided further stirring to the crowd.'
How to use "further stirring" in a sentence
Basic
Advanced
further stirring
After further stirring the crystals are filtered.
A precipitate is developed which dissolves on further stirring.
Further stirring was kept overnight at room temperature.
This provides a further stirring action to the feed.
Further stirring is carried out until dispersion is complete.
A solid was formed after the acidification and further stirring.
No further stirring during administration is necessary.
The mixture was cooled to room temperature under further stirring.
Further stirring gave a clear liquid.
A purple precipitate was observed which redissolved on further stirring at ambient temperature.
Further stirring is carried out until suspension is complete.
The oil that initially separated out solidified on further stirring.
The solution is then allowed to cool without further stirring until ambient temperature is reached.
The reaction mixture turned into a yellow solution and a white precipitate slowly reappeared on further stirring.
Further stirring gave a gel-like composition.
See also
Once the PVOH had dissolved the mixture was allowed to cool with further stirring.
After further stirring for 1h the reaction was complete.
Ethyl acetate and water were added, followed by further stirring.
Further stirring to complete dissolution of the active principle ; and.
Finally, boric acid is added with further stirring until fully dissolved.
Further stirring was carried out at room temperature for 3 hours.
After slowly adding water, ethyl acetate was added, followed by further stirring.
After further stirring the mixture, the organic layer was separated.
After a minute an orange-brown oil formed which solidified on further stirring.
After further stirring for 1 h at ambient temperature, the product begins to crystallize.
If the mixture is still inhomogeneous, further stirring is effected until the mixture is homogeneous.
Further stirring of the mixture is often desirable, to ensure complete mixing and emulsification.
Ethyl acetate and water were added to the reaction solution, followed by further stirring.
Further stirring and addition of the remainder of the water resulted in a smooth, creamy slurry.
A white precipitate of AgCl resulted upon addition, which dissolved upon further stirring.
Further stirring at ambient temperature for 2 hours resulted in some solubilisation of the yellow solid.
The cream is mixed intensively and cooled slowly to room temperature, with further stirring.
The mixture formed an oil / solid mixture which upon further stirring yielded a uniformly crystalline material.
After warming to room temperature, a saturated ammonium chloride solution was added, followed by further stirring.
Further stirring for an additional 15 minutes, the mixture was evaporated.
Then, ethyl acetate and a saturated ammonium chloride solution were added, followed by further stirring.
After further stirring for 30 minutes, the organic phase was separated.
Kathon ™ WT was then added slowly to the mixture with further stirring.
Further stirring was continued for an additional 0.5 hr, and tlc indicated the absence of trinitroanisole.
After additional stirring, 16.06 g deionized water were added under further stirring in small increments.
After further stirring of 10 min, the prepared glycerol monostearate dispersion mentioned above was added.
Potassium carbonate ( 84 mg ) was added to the reaction mixture, followed by further stirring for 30 minutes.
After further stirring the reacting melt was poured into polypropylene bottles preheated to 95°C.
Thereafter, the mixture was allowed to cool down to room temperature ( about 21°C ) under further stirring.
After adding dropwise, further stirring for a time of 60 minutes to obtain the SPPO emulsion.
Further stirring takes place for 24 hr.
Further stirring was allowed for 45 mins.
After further stirring for 1.5 hours, the reaction mixture is evaporated.
After further stirring for 0.5 hours, the reaction mixture is poured on to ice.
After further stirring the mixture for 10 minutes at -5°C and then poured into ice and water.
You'll also be interested in:
Examples of using Further
Show more
Further measures will certainly have to be taken
I will be in touch with further instructions then
Further strategic actions to reduce maternal mortality
Examples of using Stirring
Show more
Our master chef is stirring up a fresh batch
And stirring up indian warfare in the northwest
Thanks a lot for stirring up the past
