Examples of 'fuselage using' in a sentence
Meaning of "fuselage using"
The phrase 'fuselage using' refers to the process of constructing or building the main body of an aircraft, known as the fuselage, by utilizing specific techniques or materials. It implies the act of assembling and shaping the framework and structure of the aircraft, which often involves the use of metal, composites, or other materials
How to use "fuselage using" in a sentence
Basic
Advanced
fuselage using
Secure the wing in the fuselage using a screw.
Glue the fin to the fuselage using the adhesive supplied in the kit.
Fit the fi rst stabilizer half on the fuselage using the tube.
Secure the servo in the fuselage using the hardware provided with the servo.
Kili and stabilizer consoles dock with the fuselage using fittings.
Attach the fl oats to the fuselage using the hardware included with the fl oats.
Attach the main undercarriage unit to the underside of the fuselage using the screws provided.
Secure the servo in the fuselage using the screws provided with the servo.
Place the windscreen former in place and glue the bottoms to the fuselage using epoxy.
Secure the stabilizer to the fuselage using the hardware listed.
Carefully remove the covering film from the tailplane mount on the fuselage using a balsa knife.
Secure the battery in the fuselage using the hook and loop straps.
The flight battery is also attached to the fuselage using Velcro tape.
Mount the switch in the fuselage using the hardware provided with the switch.
Caution, the speedbrake is already attached to the fuselage using an elasto-hinge.
The canopy is held on the fuselage using the rubber band fitted inside the fuselage.
Trace the outline of the exhaust on the side of the fuselage using a felt-tipped pen.
Secure the cover to the fuselage using the hardware listed.
The ON-OFF switch can be fixed to the inside of the fuselage using Velcro tape.
Secure the fuel tank in the fuselage using the tie wraps included with your model.
Install the rear right and left landing gear struts ( A ) in the fuselage using six screws B.
Secure the cowling to the fuselage using the four cowl mounting screws.
Fully install left wing in fuselage using screw.
Secure the receiver in the fuselage using two-sided tape and a hook and loop strap.
Secure the windows inside the fuselage using canopy glue.
Secure the retract in the fuselage using the four M4 x 12 socket head cap screws.
Secure the foam sheet in the fuselage using hot glue.
Glue the rudder servo in the fuselage using UHU-por, positioning the output arm in the.
The cockpit glazing can now be fixed to the fuselage using clear adhesive tape.
Secure the stabilizer to the fuselage using the screws and a 2 Phillips screwdriver.
Secure the receiver and remote receivers in the fuselage using hook and loop tape.
Mount the elevator servo in the fuselage using the hardware provided with the servo.
Fix the flight battery in its compartment in the fuselage using hookand-loop tape.
Glue the tailplane to the fuselage using white glue UHU Wood Glue.
Drill 2 mm Ø pilot-holes, and fix the cowl to the fuselage using the screws supplied.
Secure the wings to the fuselage using the included 2 screws ( C ) as shown.
Secure the engine mounting rails to the fuselage using the hardware listed.
Mount the speed control inside the fuselage using hook and loop tape not included.
Secure the remote receiver inside the fuselage using hook and loop tape.
The tailplane is attached to the fuselage using two pan-head self-tapping screws.
Secure the remote receivers in the fuselage using hook and loop tape.
Glue the magnets in the fuselage using foam cyano.
Secure the wing to the fuselage using the nylon bolt.
Attach the landing gear to the fuselage using the hardware listed.
Secure the tabs inside the fuselage using the hardware listed.
Secure the battery tray in the fuselage using the hardware listed.
The battery is secured in the fuselage using a hook and loop strap.
Install the ignition module in the fuselage using a hook and loop strap.
Secure the speed control in the fuselage using hook and loop tape.
Secure the receiver battery in the fuselage using a hook and loop strap.
You'll also be interested in:
Examples of using Fuselage
Show more
Tip of the fuselage turns to the right
Check the fi t of the hinges to the fuselage
Completing the fuselage and tail panels
Examples of using Using
Show more
Mash kidney beans using a potato masher
Log in using the default administrative account
Proportion of households using a clean water source
