Examples of 'fuser' in a sentence
Meaning of "fuser"
fuser (noun) - A fuser is a part of a machine or device that joins together or melts materials by heat or pressure. In printing, a fuser is the component of a printer that melts the toner onto the paper to create the printed image
Show more definitions
- The part of a laser printer that melts the toner onto the medium.
How to use "fuser" in a sentence
Basic
Advanced
fuser
You can print a fuser cleaning sheet.
The fuser is placed up on the right side.
The temperature in the fuser is abnormally high.
And you can find the fuser.
The temperature in the fuser is abnormally low.
The fuser unit inside the machine is hot.
Remove the new fuser from the bag.
The fuser unit inside the printer is hot.
It also passes through a fuser to melt the toner on.
This fuser works only on the starter motor.
Select settings to avoid fuser damage.
It cleans the fuser unit inside the printer.
With a guy who had that fuser machine.
Remove the fuser from its protective bag.
You do not have to know how a fuser works.
See also
The fuser is nearing the end of its life.
Another technique incorporates the use of a tube fuser.
Katun became a fuser roller manufacturer.
The fuser is not installed or is at the end of its life.
Do not change the fuser mode for transparencies.
The fuser unit becomes extremely hot during operation.
Support for fuser command.
This can be repaired by replacement of the front fuser door.
Remove the fuser and inspect it.
Fuser cleaning pad.
Place the used fuser in the bag for recycling.
Fuser kit is included in base and extended limited hardware warranty.
Insert the new fuser unit into the printer.
Fuser is correctly installed.
Check to see if the gear in the fuser unit is damaged.
Push the fuser unit back into the printer firmly.
For a complete list of laser printers with fuser maintenance coverage.
Do not touch the fuser unit or the metal area around it.
Replacing the fuser.
Orange tape connects fuser spacers to the outside of left door.
If the sheet is well advanced into the fuser only a short.
Make sure that the fuser levers are in the lock position.
The next thing you can do is to adjust the fuser temperature.
Check that the fuser holder locks properly into place.
See the leaflet supplied with the fuser unit for details.
Receive free fuser replacement for the life of your warranty.
Close the door after removing the fuser spacers and the tape.
Enjoy free fuser replacement for the life of your warranty.
Make sure that jammed paper is not remained inside the fuser unit.
That is not the molecular fuser it had on entering the tube.
Put the fuser holder and grease filters into their place again.
Replace fuser kit.
Change the fuser mode back to the default or to a different paper type.
Innovative fuser design.
Lock the fuser in place by rotating the two blue latches down.
