Examples of 'gain reduction' in a sentence
Meaning of "gain reduction"
gain reduction: In audio engineering, it refers to the process of reducing the level of a signal to achieve a more balanced mix
How to use "gain reduction" in a sentence
Basic
Advanced
gain reduction
The amount of gain reduction is determined by a ratio.
Signals and the amount of gain reduction.
There is a gain reduction meter at the top of each meter.
This meter shows the true peak gain reduction in dB.
Turns red when gain reduction occurs anywhere in the amplifier.
The area between the two is the amount of gain reduction.
Measurers of gain reduction of the monitor assigned to the screen of the channel.
A good means to achieve that consists in checking on the gain reduction.
You can see this when the gain reduction meter starts lighting up.
An inverting amplifier can be used at this stage to enable gain reduction.
This implies that the gain reduction due to CF is typically relatively small.
The gain bar above the control shows the amount of gain reduction.
The Limit led lights up if a gain reduction is taking place due to a programmed compressor.
Both zones have unbalanced and balanced outputs with master gain reduction.
Gain Reduction is our biggest product and our first product that we put out.
See also
The threshold controller can now be used to adjust the desired amount of gain reduction.
Level indication VU and indication of gain reduction GR when the limiter is active.
A special circuitry makes the process independent from the absolute amount of gain reduction.
In Hard-Knee mode, gain reduction is linear based on the Threshold and Ratio controls.
Therefore fast attacks always produce higher amounts of gain reduction than longer ones.
Sturgis designed the Gain Reduction plug-in based on his experience in his own studio.
The limiter display informs you about the amount of gain reduction perfomed by the limiter.
RATIO, gain reduction of the processed ( compressed ) signal compared to the.
Medidor de reducción de ganancia gain Reduction.
The effective gain reduction is 2 dB.
Resultant loop ACP will be degraded by the amount of RFPA small signal gain reduction.
While this Kiho is active, you gain Reduction equal to your Water Ring.
Figure 4 is a flow chart for a process of selectively applying system gain reduction.
Thus, the tuner portion 100 initiates gain reduction approximately 10 dB earlier for digital television signals.
This figure is based on a very fast attack time which produces -6 dB of gain reduction.
Level indicator VU and gain reduction GR.
ATTACK - Adjusts the amount of time the compressor takes to reach full gain reduction.
Traditionally, feedback management systems minimize feedback through gain reduction in specific frequency channels.
It determines the time the mpressor 500 needs to reach 10 dB of gain reduction.
When the amplitude drops below the threshold, gain reduction will not be applied.
Now lower your threshold, so you get about 1 to 3 DB of gain reduction.
Each fader strip offers 4 segment level plus gain reduction & Gate Closed status.
It determines the time the xpressor 500 needs to reach 10 dB of gain reduction.
Attenuation, This LED-style meter shows the amount of gain reduction that the Limiter im.
Here, a burst signal is used to demonstrate the effect of the Gain Reduction Limiter.
Pressing both switches results in a gain reduction of 40 dB.
We apply subtle compression with about -5dB of gain reduction.
Threshold is the level that once the signal exceeds, gain reduction is applied.
You'll also be interested in:
Examples of using Gain
Show more
Gain fury when swapping weapons in combat
Interest income and gain on sale of securities
Gain consumer confidence in new forestry practices
Examples of using Reduction
Show more
Disaster risk reduction and disaster management
Encouraging the forests to contribute to poverty reduction
Noise reduction systems for use on vessels
