Examples of 'gas is cooled' in a sentence
Meaning of "gas is cooled"
gas is cooled: Describes the process of lowering the temperature of a gas, causing it to condense or change state. This phrase is used in scientific contexts or discussions about thermodynamics
How to use "gas is cooled" in a sentence
Basic
Advanced
gas is cooled
The gas is cooled and condensables are obtained.
The low-pressure warm gas is cooled in an ambient cooler.
The gas is cooled either before or after it is divided.
Thus, the water is heated whereas the gas is cooled.
The waste gas is cooled and cleaned in a venturi.
In the cooling means, the compressed coolant gas is cooled.
The hot drying gas is cooled in the process.
Gas is cooled after the reforming unit and conducted to be used.
This ensures that the process gas is cooled to the correct shift converter inlet temperature.
The displacer carries out most of his race, the gas is cooled.
The gas is cooled with water.
Through the aforementioned process, the exhaust gas is cooled and depressurized.
The feed gas is cooled by the vaporizing water.
Generally, in large buildings, the refrigerant gas is cooled by the use of water.
Wet regeneration gas is cooled using air and condensed water is separated.
See also
H? S and dust removal in cases where the process gas is cooled before combustion.
After that the gas is cooled in a heat exchanger to remove the reaction heat.
Now, due to the expansion, the gas is cooled down.
The fuel gas is cooled below the dew point in each of the heat exchangers.
As a result, the EGR gas is cooled.
The hot flue gas is cooled and saturated with water vapor in the prescrubber vessel.
More preferably the oxygen-containing gas is cooled before its stay in the gas transport unit.
The gas is cooled indirectly, enabling the reactor heat to be utilized in a known manner.
The initial natural gas is cooled and partially condensed ;.
The gas is cooled in condenser EC 1 so as to be partly liquefied.
Thereafter, the hot gas is cooled in chiller train 14.
This gas is cooled by the fluid circulating in the Type II compartments of zone 6B.
Dehydrogenation reaction product gas is cooled to condense 3,3-dimethylbutanal product.
The gas is cooled in the cold box 406 and further divided.
In the subsequent step the gas is cooled to a temperature about -39°C.
Subsequently, this gas is cooled to a temperature below the solidification temperature of sulfur.
Usually, the crack gas is cooled after exiting the furnace.
The feed gas is cooled to remove water, compressed, dried, and partially condensed.
Condenser - where hot ammonia gas is cooled and condensed to create liquid ammonia.
The natural gas is cooled according to the process previously described in FIG . 1.
Cryogenic tunnels, Here test gas is cooled down to increase the Reynolds number.
The feed gas is cooled in a heat exchanger ;.
In a preferred embodiment the gas is cooled until a temperature below -20°C has been reached.
For example, as a gas is cooled it remains a gas until it suddenly turns into a liquid.
The refrigerant gas is cooled and condensed in the condenser 3.
The resultant process gas is cooled in a condenser, in which the mercury-selenide dust is extracted.
The synthesis gas is cooled in a quenching medium ( not shown ), such as water.
The oxygen enriched gas is cooled and liquified in the heat exchanger / condenser assembly 204.
In the figure, the gas is cooled in an exchanger 63 and separated in a phase separator 65.
You'll also be interested in:
Examples of using Gas
Show more
Hope you like gas station taquitos
Gas can make you do funny things
Verify the gas line has been purged
Examples of using Cooled
Show more
The air is then cooled down by evaporation
The cooled or conditioned goods have been unloaded
Clean the air cooled condenser fins
