Examples of 'gas oils' in a sentence
Meaning of "gas oils"
Gas oils refer to a range of petroleum products that have a higher boiling range than gasoline but lower boiling range than lubricating oils. They are commonly used as fuel for industrial processes, heating, and in diesel engines
Show more definitions
- plural of gas oil
How to use "gas oils" in a sentence
Basic
Advanced
gas oils
Process for treating gas oils.
Typical specifications for gas oils are reported in the following table.
Fiscal marking of gas oils.
The flow point of gas oils corresponds as a maximum to this exothermic effect.
A complex combination produced by desulphurisation of gas oils with diethanolamine.
Steam cracked gas oils are exemplary of a refinery stream that can have this property.
A complex combination produced by desulfurization of gas oils with diethanolamine.
Marine gas oils - amending current provisions.
A complex combination produced by desulphurization of gas oils with diethanolamine.
O Fiscal marking of gas oils and kerosene Tax exemptions.
Sulphur content of gas oils.
Distilled feeds such as gas oils are preferred feeds for FCC.
Light and medium petroleum oils and gas oils.
For the sulphonation of gas oils and lubricating oils.
Hydrocarbons of this kind are primarily found in gas condensates and gas oils.
See also
Petrol and gas oils.
Typical streams are raw or hydrogenated catalytic or thermally cracked distillates and gas oils.
The presently most preferred feedstocks are heavy gas oils and hydrotreated residua.
Typical stream cracker feedstocks range from gaseous paraffins to naphtha and gas oils.
In addition, certain fractions of gas oils possess different properties.
This Directive shall not apply to gas oils.
In some refineries gas oils may be further processed into lubricating oils ;.
On establishing a common fiscal marker for gas oils and kerosene.
These 42 gas oils and kerosenes may be found in certain products available to consumers.
Other desirable product fractions can include gas oils and naphthas.
Sulfur contained in gas oils ( diesel fuels ) constitutes a particularly serious environmental problem.
Table II gives the characteristics of the gas oils used.
In particular, vacuum gas oils with low sulfur contents have been shown to be successful.
The Council adopted the Directive on the fiscal marking of gas oils and kerosene.
Gas oils including diesel fuels, home heating oils and gas oil blending streams.
Proposal for a Council Directive on fiscal marking of gas oils.
Gas oils intended for use by non-road mobile machinery and agricultural tractors ' means.
Process for the manufacture of kerosine and / or gas oils.
Fiscal marking of gas oils Beumer, Bangemann Commission.
Hence traces of vanadium are usually found in vacuum-distilled gas oils.
The following gas oils were tested,.
These hydrocarbon fractions include jet fuel, diesel fuel, kerosine and gas oils.
For example, for metropolitan Stockholm área, gas oils have been subdivided into the following classes,.
While the sulphur requirement for light fuel oils applies to marine gas oils i . e.
O Gas oils and kerosene, fiscal marking Further information,.
The feedstock is first processed through a hydrotreatment zone 2 in combination with recycled gas oils.
The characteristics of the engine gas oils EGO 2 and EGO 3 are shown in Table 6 below.
For example, naphtha feeds require a higher temperature in the cracking zone than gas oils.
Gas oils, c For other purposes II.
Paragraph 1 shall not apply to gas oils.
Gas oils ( petroleum ), hydrodesulfurised heavy vacuum.
Solvents of this type are, for example, diisopropylbenzene, gas oils or domestic fuel oils.
Gas oils ( petroleum ), hydrodesulphurised heavy vacuum ; Heavy fuel oil.
EC, fiscal marking of gas oils.
Gas oils ( petroleum ), hydrodesulfurized heavy vacuum ; Heavy fuel oil.
