Examples of 'gas piping' in a sentence
Meaning of "gas piping"
Gas piping refers to the system of pipes used for transporting natural gas or other forms of gas within a building or infrastructure. It includes the pipes, fittings, and valves necessary for the safe and efficient distribution of gas from the source to the intended locations
How to use "gas piping" in a sentence
Basic
Advanced
gas piping
Check entire gas piping for leaks.
Definitions shore and vessel gas piping.
Rising gas piping with oil trap b.
Leaking or damaged water and gas piping.
Locations of upward gas piping and drain connection.
Be sure to insulate liquid and gas piping.
Locations of backward gas piping and drain connection.
Gas piping and installation must be done by a qualified gas installer.
Use only approved gas piping materials.
Gas piping is also offered for new or existing businesses.
In the case of extended flue gas piping horizontal sections.
Do not connect the ground to the city water or gas piping.
Medical gas piping systems.
Connect the other end of the connector to the gas piping.
We installed gas piping here.
See also
Equivalent piping length is obtained with actual length of gas piping.
With longer lengths of exhaust gas piping horizontal sections.
The gas piping not being freed of the air sufficiently and so the.
Elbows of metal for connecting gas piping to gas appliances.
The building shall not be weakened by the installation of any gas piping.
It is the responsibility of the gas piping installer to identify the code.
Hand dig when excavating near any buried gas piping.
Oil traps in the rising gas piping can prevent this.
All gas piping should be tested after installation in accordance with local codes.
All old gas connectors and gas piping should be discarded.
Gas piping has not been properly bled of air in the case of first ignition.
Check gas pressure and check all gas piping for leaks.
Test all gas piping and connections for leaks after installation or servicing.
Steer clear of any projects having to do with natural gas piping or electrical lines.
An operation performed on a gas piping system to verify that the system does not leak.
One big drawback of this system is the complexity of the gas piping system.
All gas piping and connections must be tested for leaks after installation is completed.
Use the appropriate table to determine the total capacity of your current gas piping.
All gas piping must be installed in compliance with local codes and utility regulations.
Only a qualified service person must install gas piping and connect appliance to gas supply.
Buried gas piping should be periodically inspected for leaks and corrosion if piping is metallic.
Make sure the electrical wiring does not come into contact with the gas piping.
The whole gas piping must be checked carefully for leakages with a leak indicator spray.
Execute heat insulation work completely on both sides of the gas piping and liquid piping.
Check all gas piping for leaks with a soap and water solution before operating unit.
Other more specialized plumbing systems include natural gas piping and central vacuum systems.
Gas piping Ignition or explosion may occur if the gas leaks.
The building has its own gas producer and still has gas piping and fittings.
Medical gas piping drawings incomplete / out of date.
D In the gas piping.
All field gas piping must be pressure / leak tested prior to.
Monomers, hydrogen and oxygen were fed into the cycle gas piping.
All connections to the gas piping must be wrench-tightened.
If the gas piping is not well installed or maintained, it too can cause a fire.
Hold gas control with wrench when connecting it to gas piping and / or fittings.
