Examples of 'gas-tight' in a sentence
Meaning of "gas-tight"
Gas-tight (adjective): Sealed or constructed in a way that prevents the passage of gas, air, or other substances. Often used in the context of industrial equipment, protective suits, or storage containers to ensure safety and containment of hazardous materials
How to use "gas-tight" in a sentence
Basic
Advanced
gas-tight
Mounted with gas-tight compression fitting.
Lance holders should be completely gas-tight.
The use of gas-tight silicone septa is recommended.
Most sinters were found to be gas-tight at.
Gas-tight molded casing for an electrical apparatus.
Their inner layer is a gas-tight matrix of polyamide.
A gas-tight seal is maintained thereby during actuation.
Do not charge the battery in a gas-tight container.
The gas-tight element system with high flexibility.
The resultant disk is dense and gas-tight.
The gas-tight seals will be discussed in detail below.
The resultant membrane is dense and gas-tight.
Gas-tight seals must be provided around such instruments.
One or more spaces were combined to form gas-tight cells.
The supported gas-tight ceramic is formed by thermal spraying.
See also
A metal bellows has the advantage of being completely gas-tight.
Gas-tight silicone rubber seal made for wet locations.
Containers for such fluids do not need to be gas-tight.
The salt is therefore completely gas-tight and impermeable to water.
Check the tightness of the suit or dry gas-tight.
This requires gas-tight seals at either end of the kiln.
These two mechanical means provide a gas-tight seal.
Micropipettes or gas-tight syringe for the preparation of working standards.
This is because the seal has the gas-tight.
Under many situations such a gas-tight seal is not necessary.
Gas-tight serum vials are filled with enzyme and solvent.
The enclosure doors shall be closed and gas-tight sealed.
This type of gas-tight structure is known from furnace walls.
Such valves shall be fitted with gas-tight plugs or caps.
Further, the gas-tight means are unnecessary in some applications of these torches.
Other products which may be of interest are gas-tight oxygen probes.
Device for closing in a gas-tight manner the opening of said container.
Coatings may also be used to make an inner liner gas-tight.
The sealing should establish a gas-tight seal of the duct.
The use of gas-tight plastic film for drip irrigation shall be prescribed.
Moreover heat sealing provides in a simple manner a gas-tight seal.
Electric switching unit comprising a gas-tight casing for protection of contacts.
A few minutes of preparation goes a long way in ensuring a watertight or gas-tight joint.
Much lower cost of a furnace since a gas-tight furnace becomes unnecessary.
Generally, the electrode is stored in a container having substantially gas-tight walls.
Designed with a ceramic gas-tight tip and mounted with sliding flange.
Be separated from the engine and boiler rooms in a gas-tight manner.
Supplied as standard with gas-tight ferrule compression fittings on high-pressure side.
The tube was sealed using a screw cap with a gas-tight fitting.
Moisture and gas-tight package that can be sealed by a film of thermoplastic material.
A combination electrode was fitted in each vessel vía a gas-tight port in the lid.
The gas-tight coating preferably comprises a metalized film and / or a metal film.
Multiple dishes containing the grafts are shipped in a sterilized gas-tight container.
Certain applications require the use of gas-tight materials, in particular against steam.
The flexible pouch is then heat sealed to form a gas-tight seal.
