Examples of 'gauge pressure' in a sentence
Meaning of "gauge pressure"
Gauge pressure is the pressure measured relative to atmospheric pressure. It is used to determine the pressure difference between the measured value and the atmospheric pressure. Gauge pressure is commonly used in various fields, such as physics, engineering, and industrial applications to monitor and control pressure
Show more definitions
- The absolute pressure minus the atmospheric pressure.
How to use "gauge pressure" in a sentence
Basic
Advanced
gauge pressure
The pressures are respectively indicated as a gauge pressure.
Gauge pressure and vacuum for fuel pump.
Measuring range for gauge pressure.
Gauge pressure sensorThis sensor measures the pressure relative to atmospheric pressure.
Measuring cell for gauge pressure.
The gauge pressure is the pressure above the local atmospheric pressure.
All pressure readings are stated in gauge pressure.
Transmitters for gauge pressure for the paper industry.
Do cleanings weekly delivery or as needed when the gauge pressure is high.
The gauge pressure of the liquid being circulated was recorded every one hour.
Can be used for absolute and gauge pressure measurements.
Oxygen is supplied to both the leaching reactors by maintaining the desired gauge pressure.
Tonometry is a procedure used to gauge pressure levels within the eye.
Gauge pressure sensor This sensor measures the pressure relative to atmospheric pressure.
This is a result of the difference between gauge pressure and absolute pressure.
See also
The representative of the Netherlands would submit a proposal concerning the external gauge pressure.
Turn on the compressor and note the gauge pressure reading on the compressor.
In practice, pressure is most often measured in terms of gauge pressure.
A vacuum pump provides a negative gauge pressure and a compressor provides a positive gauge pressure.
Another less preferred pressure sensing device is a strain gauge pressure sensor.
Measuring range for gauge pressure for US market only.
This internal pressure P corresponded to gauge pressure.
There are several OPTIBAR gauge pressure transmitters for open or vented vessels applications available.
Therefore the absolute pressure of a closed system will always be gauge pressure plus atmospheric pressure.
Measuring cell for gauge pressure with front-flush diaphragm.
The pump outlet pressure sensor typically detects the gauge pressure of the pump outlet.
The maximum effective gauge pressure to which the shell is designed, which shall be.
MAWP Maximum Allowable Working PressureThe maximum gauge pressure at the top of.
The maximum effective gauge pressure allowed in the shell during filling or discharge ; or.
Reciprocating displacement compressors, having a gauge pressure capacity of.
The maximum effective gauge pressure to which the elements are designed, which shall be.
In a preferred embodiment, the sensor is a gauge pressure sensor.
Operated with a gauge pressure of about 6 bar.
Steam was supplied to the first and second jets at a gauge pressure of 1 MPa.
Test pressure means the maximum gauge pressure of the elements during the pressure test ;.
The reading of the barometer is to be added to the indicated air-flow gauge pressure.
The fuel level may be dependent on a gauge pressure Pg that may be calculated.
Torr and micron usually indicates an absolute pressure, while inHg usually indicates a gauge pressure.
As such, it is only possible to obtain a gauge pressure of the organ preservation fluid.
Gauge pressure measurement Liquids, gases and vapors.
Was the pressure ratio, absolute pressure or gauge pressure used for dimensioning?
CmH2O gauge pressure on the liquid crystal display screen.
The internal pressure vents to zero gauge pressure without rupture of the cartridge ; or.
A gauge pressure can be measured by a Bourdon-tube pressure gauge.
Preferably, the first heat transfer fluid has a gauge pressure of less than 4 bar.
Zero point calibration for gauge pressure transmitter To calibrate the zero point, proceed as follows.
For most working fluids where a fluid exists in a closed system, gauge pressure measurement prevails.
In the following Examples, a gauge pressure was measured with a Bourdon-tube pressure gauge.
Preferably the hydrogen pressure is maintained at a gauge pressure of about 5 PSI.
Single gauge pressure indicators ( tank volume ).
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Gauge
Show more
And gauge how we might come together
Slide the depth gauge rod backward
Pressure gauge to detect blockage of secondary filter
