Examples of 'gear case' in a sentence
Meaning of "gear case"
Gear case: a protective covering or housing for gears, commonly used in machinery and vehicles to prevent damage and ensure smooth operation
Show more definitions
- An enclosure for the bicycle chain and sprocket assemblages commonly employed by utility bicycles. It protects the chain from mud and dirt and may also contain an oil bath to keep the chain lubricated.
How to use "gear case" in a sentence
Basic
Advanced
gear case
Check gear case is filled with grease.
Replace the two gear case screws.
Slide gear case onto outer tube.
Insert shaft into gear case.
Install gear case onto outer tube.
Loosen the four screws on the gear case.
The gear case becomes hot during operation.
Assembly of the rear gear case onto chassis.
Attach the adjustable nosepiece to the gear case.
Remove existing gear case assembly from unit.
Tighten the four screws on the gear case.
Pull the gear case off of the tool.
Change the gear oil in the gear case.
The gear case has been completely lubricated at the factory.
Do not touch the gear case.
See also
The auger gear case is equipped with a grease fitting.
Lubrication structure of gear train encased in gear case.
The armature and gear case cover are one subassembly.
A dust guide is installed inside behind the gear case.
The gear case was filled with lubricant to the proper.
Failure to do so could result in damage to the gear case seals.
Push it into the gear case depressing the sleeve.
Attach the protector cover onto the gear case.
Do not hold gray gear case when impacting or drilling.
Washer aligns with the hole on the gear case.
The gear case becomes very hot during use.
Place the shear head on the gear case collar of.
The gear case top bumper may wear with use.
A motor gear of a wipe motor is accommodated in a motor gear case.
Steering gear case position.
A gear case is affixed to the body to activate the boring bar.
The injection molded gear case cover exhibited less porosity.
Line up the hole on the end of the gear case into.
Rotate the gear case till it reaches its ideal location.
Reinstall screws to attach the gear case to the motor housing.
The gear case was fi lled with lubricant to the proper level.
Align the lugs with slots on the gear case cover.
The gear case has been filled with the proper.
Do not operate the engine with gear case out of water.
The gear case was fi lled with lubricant to the proper level at the factory.
Remove any foreign matter on the gear case and propeller if necessary.
The side handle may be installed on either side of the gear case.
The gear case was filled with lubricant to the proper level at the factory.
Close the guard latch to secure the guard on the gear case.
The gear case is fi lled with lubricant to the proper level at the factory.
Remove the four corner screws attaching the gear case to motor.
Drain the gear case and check for excessive moisture in the oil.
The side handle can be fitted to either side of the gear case.
The invention also relates to a gear case for such a toy gear box.
The gear case is filled with lubricant to the proper level at the factory.
You'll also be interested in:
Examples of using Gear
Show more
Automatic start gear detection active or not
Gear choice for deceleration or cruise phases
Inspection of draw gear and chafing irons
Examples of using Case
Show more
This is clearly a case for nux vomica
Just in case you were wondering where this is
Seven countries presented case examples or statistics
