Examples of 'gear housing' in a sentence
Meaning of "gear housing"
Gear housing: A component of a machine where gears are enclosed or contained. It is used in the context of mechanical engineering to protect the gears and facilitate their movement within a machine
How to use "gear housing" in a sentence
Basic
Advanced
gear housing
Make sure the gear housing is lubricated correctly.
There are two grease nipples on the gear housing.
Do not touch the gear housing until it has cooled.
To gain access to the gear housing.
A gear housing is fastened to an end wall of the stator housing.
Clean the air fi lter and gear housing.
The gear housing gets hot after long periods of use.
Engine is not seated properly on the gear housing.
If it is flush with the gear housing do not add grease.
Onto the cylindrical section of the gear housing.
The gear housing must not be filled completely with grease.
Clean the air filter and gear housing.
Clean the gear housing from dirt and foreign objects.
Remove the cover from the gear housing.
Rotate the gear housing into the new position carefully.
See also
Allow the oil to drain out of the gear housing.
Bevel gear housing.
To avoid burning yourself do not touch the gear housing.
The gear housing.
Device for connecting a steering column to a steering gear housing.
The gear housing gets hot when the machine has been in use.
Do not completely fill the gear housing with grease.
The gear housing has an opening portion on the bottom surface side.
Then put the engine back on the worm gear housing.
Replace the lubricant in the gear housing and the reduction gear housing.
Screw the handle into the side of the gear housing.
Keep hands from between the gear housing and saw blade holder.
Loosen the hex nut at the rear of the gear housing.
This gear housing accommodates all components of the planetary gear driving mechanism.
Slide the pump housing away from the gear housing.
Keep hands from between the gear housing and saw blade clamp plunger.
Normally the gear system will be enclosed within a gear housing.
Be aware that the cast metal gear housing may get hot during use.
The lubricant drain is arranged in a lower region of the gear housing.
The axle shafts are journaled within the gear housing by means of ball bearings.
It should be possible for the blade guard to rotate on the gear housing.
Gear housing that leads around the spindle and secures the guard in place.
Always align the selector with the marks on the gear housing.
The gear housing defines a lubricant drain towards the exterior of the gear housing.
Slide the fluid section forward to remove it from the gear housing.
The auxiliary handle or the gear housing cover ensures reliable guidance of the power tool.
Always work using the auxiliary handle or the gear housing cover.
Cast metal gear housing helps dissipate heat from internal components for additional durability.
Place the housing gasket over the gear housing dowel pins.
This device discloses a gear housing having an interior portion and a lubricating fluid reservoir therein.
Rotate die to any one of the fixed positions in the gear housing.
Attach the gear housing cover onto the gear head and tighten with the two screws.
There is a grease nipple and a plug for filling lubricant on the gear housing.
Such gear units have a volume inside their gear housing that is not insignificant.
Then install the locator by pushing it firmly back onto the gear housing.
You'll also be interested in:
Examples of using Gear
Show more
Automatic start gear detection active or not
Gear choice for deceleration or cruise phases
Inspection of draw gear and chafing irons
Examples of using Housing
Show more
Improved land and housing policies implemented
Housing systems for other livestock categories
Proportion of makeshift housing at the national level
