Examples of 'gear position' in a sentence
Meaning of "gear position"
gear position: The specific placement of gears in a vehicle to control speed and power. This phrase is commonly used in driving and automotive contexts
How to use "gear position" in a sentence
Basic
Advanced
gear position
I do look at the gear position before saying it.
Downward movement for shifting to a higher gear position.
The selected gear position is displayed.
A rotary switch to indicate gear position.
So that gear position control should function during this case.
Both sensors are required to enable gear position to be sensed.
This gear position supplements the parking brake by locking the transmission.
Splash guard mechanism of a gear position sensor for motorcycle.
System individually supplies assist power to detect gear position.
The gear position is only displayed when using the electronic gear shifting unit.
Move the shift lever to the desired gear position.
The gear position is information indicating the gear position of a transmission included in the vehicle.
The assistance level and speed vary with the gear position.
Shift the vehicle into the desired gear position and then release the parking brake.
This means that the same retardation is achieved irrespective of the gear position.
See also
Gear position indication The numeral for the selected gear illuminates.
A magnetic proximity switch or a monitored timer could also be used to detect gear position.
Gear position and traveling data display Displays the current gear position or traveling data.
Module for vehicle location that allows tracking GPS satellite gear position.
Select a gear position in accordance withe the contents of the Gear Selection Table.
The push button N selects the neutral transmission gear position.
How many look at the gear position on the landing aircraft?
Rotate the shifter to the 4th gear position.
As a result, the change of the gear position can be performed in a satisfactory manner.
Then, the cylinder is hydraulically locked in the engaged gear position.
Therefore, it becomes possible to change the gear position of the transmission mechanism more quickly.
The shift cam rotation angle sensor 8 detects a gear position.
The R marks reverse, the gear position used for moving the vehicle backward.
Fig . 5 is a flowchart showing an example of calibration processing for a gear position sensor.
Thus, a gear position in the transmission mechanism 43 is determined.
Indication Condition Numeral The selected gear position is displayed.
Thereby, the gear position in the transmission mechanism 43 is determined.
When this occurs, shift gears because the gear position is not appropriate.
The gear position sensor 15 detects the gear position of the transmission 4.
Here, time t4 is the time at which the changing of the gear position is completed.
Therefore, changing of the gear position of the transmission mechanism 43 does not take place.
Fig . 12 is a partial enlarged schematic diagram of the shift drum, illustrating a gear position judgment range.
An indicator 24 for indicating a present gear position is provided at a center of the handlebars 20.
Then, the bicycle B runs at the gear-change rate at the new gear position.
An indicator 45 for indicating a present gear position is provided on a center part of the handlebars 41.
Gear position ( Only displays when electronic gear shifting is in use ) B.
The sliding sleeve must be in the 1st gear position “ low ” gear ratio.
Therefore, the gear position of the transmission 43 is changed.
Shifting from neutral position N to forward hydraulic first gear position ( 1H ) will now be examined.
A device for detection of gear position in an automotive gearbox ( 4 ), which device comprises,.
A shift indicator 170 is provided which indicates a selected transmission gear position ( or neutral position ).
A method for detection of gear position in an automotive gearbox ( 4 ), comprising the following steps,.
Next, the calibration processing part 55 executes calibration processing for the gear position sensor 21.
Thus, the gear position of the transmission 5 smoothly changes from the ( n-1 ) position to the n position.
The gear movement completion judging unit 21 acquires gear position information from the gear position sensor 93.
You'll also be interested in:
Examples of using Gear
Show more
Automatic start gear detection active or not
Gear choice for deceleration or cruise phases
Inspection of draw gear and chafing irons
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
