Examples of 'gently pry' in a sentence
Meaning of "gently pry"
Refers to the act of delicately and tactfully obtaining information or details from someone
How to use "gently pry" in a sentence
Basic
Advanced
gently pry
Gently pry open to access the fuse.
A parable or fable can gently pry open our eyes.
Gently pry upward on plug to remove.
Insert a small flathead screwdriver into the slot and gently pry open the transmitter.
Gently pry the holder into the housing.
Use a flat-blade screwdriver and gently pry.
Gently pry the transmitter circuit board out of the case.
Using a trim stick or equivalent, gently pry up on the passenger.
Gently pry the holder down from the motor housing.
To remove glass light cover, remove screw and gently pry.
Gently pry them open and separate timer base from cap.
To remove the light cover, gently pry bottom edge with a flat screwdriver.
Gently pry back the tab and pull the connector free.
Use a flat-blade screwdriver and gently pry the light cover loose.
Gently pry outward the tabs that hold the memory module in place.
See also
With a flat head screwdriver, gently pry the top cover from the unit.
Gently pry the end of the lens outward until it unsnaps from the housing.
Use a flat-blade screwdriver to gently pry out the drain hose connector cover.
Gently pry the bulb from the fixture using a soft instrument such as a toothpick.
Using a small flat blade screwdriver, gently pry apart halves of fuse holder to disengage latches.
Gently pry the spring toward the unit while pulling the unit out a little.
Use a small, straight-blade screwdriver to gently pry the new traction tire into the wheel groove.
Gently pry the lens off by moving the screwdriver handle away from the oven wall.
After all fuel drained from tank, gently pry out fuel fillter with minus driver and.
Gently pry open the lid until the vacuum is released and remove the metal lid.
Insert a small, flat-bladed screwdriver into the slot and gently pry open the access door.
Screwdriver to gently pry the old traction tire out of the wheel groove.
Tip, A small screw driver can be used to gently pry the plug out.
Ewdriver to gently pry the new traction tire into the wheel groove.
Insert a flat-blade screwdriver, and gently pry off the light shield.
Gently pry the center anchor up and the foot will come OFF.
Using a thin, flat-blade screwdriver along either short edge, gently pry the cover off.
Gently pry the WWAN retaining clip way from the WWAN card.
Using a flat head screw driver, gently pry out the elastomer ( C ) as shown.
Gently pry the WLAN retaining clip way from the WLAN card.
Old traction tire out of the wheel groove . - Use a small, straight-blade screwdriver to gently pry.
Gently pry off the Top Hinge Cover with a flat head screwdriver and remove it.
Using a trim stick or equivalent, gently pry out on the cowl trim ( 1 ) and remove.
Pull or gently pry the shaver halves apart, exposing the battery.
Using a spudger, gently pry the tongue out of the mouth.
If not, gently pry the metal plate to make good contact.
Using putty knife gently pry trim ( I ) away from fresh food handle until.
Pull or gently pry apart the front half of the shaver to expose the 2 screws.
