Examples of 'glass mold' in a sentence
Meaning of "glass mold"
Glass mold: A form or structure used for shaping hot, molten glass into a specific design or shape. It is commonly used in glassblowing and glass manufacturing processes
How to use "glass mold" in a sentence
Basic
Advanced
glass mold
Glass mold has always been an industry problem.
The composition is subsequently molded in a pregreased glass mold.
The glass mold is sealed and placed in an oven.
The resulting mixture was poured into a glass mold and kept at room temperature overnight.
The glass molds can be designed and purchased from commercial glass mold suppliers.
This gel suspension was immediately poured into the prepared glass mold in the culture dish.
In the case of a glass mold a wick tab has to be attached.
Then, a cured product was taken out of the glass mold.
Remove the cured glass mold and place in a clean storage tray.
Then, a cured product was taken out from the glass mold.
The mixture is poured into a MYLARR lined glass mold and cured as described in example 12.
After the polymerization, the polymer was removed from the glass mold.
Separate the glass mold from the polycarbonate lens with the polarized PVA film, and.
After the polymerization, the polymer was taken out from the glass mold.
Alternatively, a glass mold may be used to form the smooth outer surface of the tool 24.
See also
After the polymerization has been finished, the polymer was removed from the glass mold.
The glass mold was then used with the formulation listed as Example 10 in Table 1.
After the completion of polymerization, the resulting polymer was taken out of the glass mold.
After the end of polymerization, a cured product was taken out from the glass mold.
After exposure, the obtained cured product was taken out from the glass mold.
After the end of polymerization, the obtained polymer was taken out from the glass mold.
The micrograph in Figures 7a and 7b were taken after removing the coating from the glass mold.
After the polymerization, the polymer ( photochromic polymer ) was removed from the glass mold.
This slurry is cast onto a dry 500 MWCO membrane fixed in a glass mold.
After 5 hours of thermopolymerization at 90°C, the cured product was taken out from the glass mold.
You'll also be interested in:
Examples of using Glass
Show more
He had a little glass of wine last night
Glass jugs are available from your retailer
I noticed the glass bedpan on your mantel
Examples of using Mold
Show more
They broke the mold on that one
Mold requires high humidity levels to grow
No one wants a mold of their own penis
