Examples of 'glossmeter' in a sentence
Meaning of "glossmeter"
A glossmeter (noun) is a device used to measure the gloss or shininess of a surface. It is commonly used in industries such as automotive, printing, and manufacturing to ensure consistent surface finishes. For instance, 'The quality control department used a glossmeter to check the finish of the products.'
Show more definitions
- An instrument used to measure the specular reflection gloss of a surface, by projecting a beam of light at a fixed intensity and angle onto a surface and measuring the amount of reflected light at an equal but opposite angle.
How to use "glossmeter" in a sentence
Basic
Advanced
glossmeter
The change in surface gloss was measured by a standard glossmeter.
Glossmeter and principle of measurement.
End result was also dimensioned using glossmeter measurements.
The glossmeter is a useful instrument for measuring the gloss of a surface.
The average of the two scores was used to calculate the glossmeter data.
Glossmeter tests on glass could not be measured due to instrumental limitations.
Lower quality measurements using a glossmeter quantify the glossy appearance of a surface in gloss units.
The gloss is measured using a portable Byk Gardner glossmeter.
A loss of glossmeter reading of 25 or less indicated an acceptable value for durability.
The gloss measurements using the curved-surface glossmeter showed similar results.
A loss of glossmeter reading of 25 or less indicates an acceptable value for durability.
The specimens were also scored using the Novo-Curve Glossmeter.
Specifically, gloss may be measured by a glossmeter which provides a quantifiable way of measuring gloss intensity.
The gloss after application of the compositions is evaluated using a MicroGloss 60 ° glossmeter from Byk-Gardner GmbH.
The results of the surface glossmeter measurements are presented in Fig . 9.
See also
This is done using the " GARDCO " LCD portable glossmeter.
Gloss was measured at a 20 ° angle with a Glossmeter commercially available from Hunter Lab.
Gloss Test The gloss was determined using a 60 degree glossmeter.
A glossmeter known under the trade designation " Micro-TRI ", from BYK Gardner, was used.
Initial baseline gloss was read with a Glossgard II-TM glossmeter to establish baseline values.
Nov. 2014 New Glossmeter installed to measure specular reflection gloss of hair.
These measurements are carried out using an Ericksen glossmeter with an incident beam of 20 °.
Gloss was measured at 60 degrees using a Pacific Scientific Gloss-Grad II glossmeter.
Gloss Gloss should be between 20 and 35 when measured with a glossmeter at an angle of 60 degrees.
Gloss reading recorded as % reflectance using a 60 ° glossmeter.
Gloss of each coat was measured with HunterLab ProGloss Glossmeter at both 20 and 60 degrees . pH,.
The shininess of the cards is then measured ( 60 ° angle ) using a glossmeter.
