Examples of 'green leds' in a sentence
Meaning of "green leds"
green leds - This phrase refers to light-emitting diodes (LEDs) that emit green light. LEDs are small electronic devices that emit light when an electric current passes through them. Green LEDs specifically produce green-colored light
How to use "green leds" in a sentence
Basic
Advanced
green leds
The green LEDs indicate blower speed.
The yellow and green LEDs will blink.
Green LEDs indicate correct operation.
Activation will be displayed all green LEDs flash.
The green LEDs start flashing.
The charging process is indicated by the green LEDs on the outside.
Red and green LEDs on charger are blinking simultaneously.
One of the challenges is the development of more efficient green LEDs.
Green LEDs will show a realtime connection is made.
The red and green LEDs should not flash.
The battery is charged completely when the three green LEDs light continuously.
The red and green LEDs flash alternately during.
The battery is fully charged when the three green LEDs light up continuously.
As a check the green LEDs of the activated zones light up.
The set sensitivity is indicated by the 4 green LEDs.
See also
The green LEDs flash when the receiver is on grade.
RF output is off when the green LEDs are not illuminated.
Red and green LEDs provide charge status feedback.
Lithium - ion charger is blinking three green LEDs.
The red and green LEDs are enabled to indicate motion detection.
After the link is disconnected, the green LEDs go out.
Red and green LEDs turn solid for two seconds.
Indicates the amount of charge left in the battery 3 green LEDs.
The green LEDs indicate the currently selected sample rate.
Plane ready to bind red and green LEDs fl ash rapidly Elevons are centered.
The green LEDs indicate the currently selected bit depth.
A coin will produce Green LEDs High tone beeps.
The green LEDs indicate the charge state by lighting up continuously or flashing.
Red LED lights up Battery charging Green LEDs light up Battery fully charged.
The green LEDs glow continuously or flash to indicate the state of charge.
In the preferred embodiment, the light sources are blue and green LEDs.
There are two green LEDs on the centre front of the housing.
If the light is outputting maximum power, the blue and green LEDs will be illuminated.
If a series of two green LEDs light for a pair then that pair is.
Approximately 5 minutes after the battery is completely charged, the three green LEDs extinguish again.
The red and green LEDs will start to quickly flash alternately.
The battery life indicators are the 4 small green LEDs on either side of the button.
The green LEDs indicate the video transmitter output power level selected.
During ringing, both red and green LEDs will light in turn and may appear amber.
Green LEDs glow as the actual condition is further away from the alarm set point.
Red and Green LEDs flash.
Green LEDs at full Blue Blue LEDs at full.
Both the red and green LEDs are on - charging in progress.
Green LEDs indicate normal operation, red LEDs indicate a malfunction.
Current Speed / Accuracy setting will be indicated by flashing green LEDs as described below.
The four smaller green LEDs turn on when a media type is inserted.
The standard Saturn has balls with red, yellow and green LEDs.
Red and green LEDs do not illuminate to indicate the battery is correctly charging.
After completing Maintenance mode, the green LEDs will begin fading on / off continuously.
A ring of green LEDs around each volume control shows the position of the control.
You'll also be interested in:
Examples of using Green
Show more
Attach green wire on top of ground strap
There is never enough green down where we are
The green light indicates a charged battery
Examples of using Leds
Show more
The LEDs then turn off automatically
Then the two LEDs flash red
Read LEDs to determine cable wiring status
