Examples of 'grinding head' in a sentence
Meaning of "grinding head"
grinding head: A colloquial term that describes the act of overthinking or dwelling on a problem or issue extensively
How to use "grinding head" in a sentence
Basic
Advanced
grinding head
Place the separator in the grinding head.
Grinding head rotate lock lever.
Turn the ring nut on the grinding head.
The grinding head can be swivelled to enable work even at inaccessible areas.
The gripper is integrated into the grinding head.
Make sure the grinding head has stopped rotating before raising the machine.
Pneumatic performing grinding head.
Each grinding head must have diamonds the same height as the other grinding heads.
Disassemble and clean grinding head and feed screw.
Place the tray on the upright part of the grinding head.
Next, move the grinding head to the left end of the bedknife.
Mechanical jam between ginding discs beneath the grinding head.
After grinding meat you can clean the grinding head by grinding a slice of bread.
Use the pusher to gently push the meat into the grinding head.
The grinding head may be swivelled, so that work in awkward places is also possible.
See also
It is easy to change the standard grinding head or abrasive disc.
The machine supports a pane of glass and rotates it with respect to a grinding head.
Pull back on handle to lift grinding head off the ground.
The below diagram illustrates the main parts comprising this type of grinding head.
There are 2 different grinding head options.
The below diagrams illustrate the main parts comprising this type of grinding head.
The grinding head 30a is set forth as an example for a detailed description as follows.
The shaft locks automatically as soon as the grinding head starts to rotate.
Be sure that the turning grinding head attachment ( B ) is inserted correctly and engaged.
Switch the unit off before you change the grinding head.
Cutting head 7 and grinding head 8 shares the X and Y axes of the orthogonal coordinate system.
Loosen the knob when you need to move the grinding head up or down.
Swiveling grinding head left / right.
The electronic speed control is used to smoothly set the speed of the grinding head.
Datas for grinding head are as below,.
On top of this, there is an even greater selection of grinding head variants.
The grinding head 9 is thus positioned facing the head 3 of the rail 1.
Press in locking button 1 whilst adjusting the grinding head 2 to the desired angle.
Thus, the grinding head maybe concave or convex, according to the need.
The driving motor controls a drive shaft 4 that cooperates with a grinding head 5.
A 3-axis coolant nozzle follows the grinding head during external machining.
The grinding head 30a is completely visible in FIG.
Place a wide, shallow bowl or plate beneath the grinding head to catch ground food.
A swivelling grinding head allows three working positions, Left - Right - Center.
During lapping, the wafer assembly is affixed to the grinding head using the dummy wafer.
The entire grinding head 6 is suspendedly held by the shaft 31.
Naturally, other possibilities for fastening the grinding means on the grinding head are also conceivable.
The entire grinding head 6 is suspended from the shaft 31.
To sharpen, swivel the grinding head.
Cutting head 7 and grinding head 8 are attached to those corresponding shafts 31.
In this way the physical connection between grinding means 14 and grinding head 11 is broken.
The grinding head 11 is supported eccentrically on the robot 10 and is not shown here.
These can then be individually removed from the grinding head 11 of the robot 10.
Each grinding head 6 is suspended in the support frame 4 along a conveying means 9 with a sheet part 14.
The linear movement base 16 is provided with cutting head 7 and grinding head 8.
