Examples of 'grinding time' in a sentence
Meaning of "grinding time"
grinding time: this phrase means to spend a significant amount of time and effort working hard on a task or project. Example: With exams approaching, it's time to start grinding time to improve grades
How to use "grinding time" in a sentence
Basic
Advanced
grinding time
Impressive reduction in grinding time in medical technology.
The grinding time is determined experimentally.
Granularity is adjustable by adjusting grinding time.
Typical grinding time is two minutes or less.
High rotation speed shortens the grinding time.
Grinding time depends on how coarse or fine a grind you desire.
Buttons and allow you to alter the grinding time.
The shorter grinding time means the better grinding efficiency.
Here you enter the variable rotational speed and defi ne the grinding time.
The extended grinding time also limits the productivity of the plant.
Add phase B and repeat the same grinding time as for phase A.
The grinding time for the right and left grinders can be programmed.
The roll In this case the grinding time is of secondary importance.
Grinding the nanofibers induces rupture of the fibers, which is proportional to the grinding time.
The requisite grinding time can be readily ascertained by measuring the pigment particle size.
See also
Precise adjustment of rotational speed, grinding time and pause periods.
The actual grinding time is only barely longer, but the grinding results are considerably better.
High degree of homogenization, short grinding time and high production efficiency.
This facilitates processing of diffi cult-tomachine materials and signifi cantly reduces grinding time.
Associating a nominal grinding time value with the nominal weight value of coffee grounds, and.
For example, a coarse grind would require less grinding time than a find grind.
The grinding time should not exceed 30 seconds.
Each time you press it, you increase or diminish the grinding time of half a second.
The total grinding time was 3 hours.
As a general guide, the chart below provides suggested bean quantities and recommends grinding time.
Storing a buffer weight value and a first grinding time value associated with the buffer weight value ;.
As a preferred embodiment, the grinding is performed by a sand mill with a grinding time of 3-4 h.
The total grinding time is 10 minutes at top speed.
Amazing upgrade from my Hario mini grinder. Grinding time was reduced by a lot, more.
Typical grinding time down to analytical fi neness 3 min 3 min.
Control box - adjustable grinding time.
Preset grinding time and rotating speed of driven motor, ;.
This optimised process sequence reduces the grinding time by up to 40 percent.
The grinding time is set digitally between 0 and 99 minutes, continuous operation is also possible.
Time of the short weighing, grinding time for each short sample dispensing ;.
The other parameters of the grinding were unchanged, and the grinding time was 200 minutes.
Time of the long weighing, grinding time for each long sample dispensing ;.
The grinding time can be preset digitally in the range from 10 seconds to 99 minutes.
It is found, however, that grinding for maximum recovery requires a grinding time of 6-8 hours.
Being T s, grinding time required for the sample tested to obtain d50.
FIG . 2, Evolution of the X-ray diffraction ( XRD ) patterns as a function of the grinding time.
The grinding time can vary from 2 seconds to 20 seconds.
In this way, the entire grinding time for the bore 14 . 3 can be completely optimized.
The grinding time ranges between 15 minutes and 3 hours.
You'll also be interested in:
Examples of using Time
Show more
Spent a lot of time with the ladies
Time and tide wait for no man
A woman needs time to think things over
Examples of using Grinding
Show more
I do not see any grinding or flecks of amber
Grinding unit does not grind the beans
Do not overfill the grinding cup container
